Abstract:Methanol is a prospective hydrogen storage medium that holds the potential to address the challenges of hydrogen storage and transportation. However, hydrogen production via methanol steam reforming faces several key obstacles, including high reaction temperature (e.g., 250–300 °C) and low methanol conversion (at <200 °C), while the purification procedure of hydrogen is commonly required to obtain high-purity H2. A novel method of H2 absorption-enhanced steam reforming of methanol is proposed to overcome the challenges mentioned above. The method involves the absorption and separation of H2 using an absorbent to facilitate the forward shift of the reaction equilibrium and enhance reaction performance. A thermodynamic analysis using the equilibrium constant method presents that the separation of H2 can improve the methanol conversion rate and the total H2 yield. The feasibility of the method is validated through experiments in a fixed-bed reactor (4 mm diameter, 194 mm length) under the conditions of 200 °C and 1 bar. In the experiments, 1 g of bulk catalyst (CuO/ZnO/Al2O3) and 150 g of bulk hydrogen absorbent (Aluminum-doped lanthanum penta-nickel alloy, LaNi4.3Al0.7 alloy) are sequentially loaded into the reactor. As a proof of concept, a CO2 concentration of 84.10% is obtained in the reaction step of the first cycle, and a gas stream with an H2 concentration of 81.66% is obtained in the corresponding regeneration step. A plug flow reactor model considering the kinetics is developed to analyze the effects of the number of cycles and H2 separation ratio on the enhancement performance. The method indicates a high potential for commercialization given its low reaction temperature, high-purity H2, and membrane-free design.

Low-temperature Catalytic Steam Reforming of Phenol for Hydrogen Production

Reaction Performance of Hydrogen from Aqueous-Phase Reforming of Methanol or Ethanol in Hydrogenation of Phenol

Aqueous System For The Improved Hydrogenation Of Phenol And Its Derivatives

Apparent Kinetics of In-Situ Hydrogenation of Phenol in Liquid Phase over Raney Ni Catalyst

Enhanced Selectivity of Phenol Hydrogenation in Low-Pressure CO2 over Supported Pd Catalysts

Thermo-regulated Water-Organic Biphasic System for Phenol Catalytic Hydrogenation

Lanthanum-promoted Pd/Al2O3 Catalysts for Liquid Phase in Situ Hydrogenation of Phenol to Cyclohexanone

Reaction pathways of phenol steam reforming over Rh and Ni-Co based catalysts supported on γ-Al2O3

Hydrogen Production from Sorption-Enhanced Steam Reforming of Phenol over a Ni–Ca–Al–O Bifunctional Catalyst

Preparation of Hydrogen Through Catalytic Steam Reforming of Bio-oil

Hydrogen Production from Ethanol Steam Reforming over Ni/Al2O3 and Ni/La2O3 Catalysts at Low Temperature

Hydrogen Production Via Catalytic Reforming of the Bio-Oil Model Compounds: Acetic Acid, Phenol and Hydroxyacetone

Hydrogen production from glycerol steam reforming over Ni/La/Co/Al2O3 catalyst

Hydrogen Production by Catalytic Steam Reforming of Model Compounds of Bio-Oil

Absorption-Enhanced Methanol Steam Reforming for Low-Temperature Hydrogen Production with Carbon Capture

Catalytic steam reforming of dimethyl ether for hydrogen production

Steam reforming of ethanol for hydrogen production over NiO/ZnO/ZrO2 catalysts

Hydrogen Production from Steam Reforming of Hydrocarbons over Alkaline-Earth Metal-Modified Fe- or Ni-Based Catalysts

Steam Reforming of Model Compounds and Fast Pyrolysis Bio-Oil on Supported Nickle Metal Catalysts for Hydrogen Production

Hydrogen Production Through Catalytic Steam Reforming of Simulacrum of Light Component of Bio-Oil in a Fluidized Bed Reactor

Hydrogen Production by Catalytic Steam Reforming of Heavy Components in Bio-Oil in Fluidized Bed Reactor