Abstract:<p>Self-shielded flux-cored wires (AWS E71 T FCW) are widely applied in the fields of construction. In this study, the effect of the electrode polarity on the mode of droplet transfer and arc stability in self-shielded flux-cored arc welding was investigated by the high-speed video camera system and electric signal. The results showed that the change of electrode polarity determined different mode of droplet transfer. In direct current electrode positive (DCEP), droplet transfer mode presented the globular repelled transfer. And the area of the arc root decreased at the bottom of the droplet because of the metallurgical reaction effect of the flux core, it resulted in the relatively lager electromagnetic force acting on the droplet, which hindered the droplet transfer. Moreover, when the droplet was separated from the welding wire, the droplet was kept rotation state under the action of the resultant force couple. In the direct current electrode negative (DCEN), the electromagnetic force promoted the droplet transfer and droplet transfer mode shown spray transfer mode. Due to the particularity of the composition and distribution of the molten slag, the conductive path was generated easily at the connection between the droplet and the wire, it made the arc root climb up and wrap the droplet, the necking phenomenon appeared obviously. In DCEN or DCEP, arc voltage and arc current have little effect on the droplet transfer mode. At the same time, compared with the welding process in DCEP, the welding process in DCEN had the advantages of higher arc stability, fewer welding spatter.</p>

Analysis of dynamic force equilibrium on droplet during short-circuiting transfer and process stability

Modeling and analysis of droplet forming in gas metal arc welding short circuiting transfer

Numerical Simulation of Molten Droplet Shape and Electromagnetic Pinch Effect in Short-Circuit Co2 Welding

Detect and Analysis of Molten Droplet in Short-Circuit Arc Welding Based on High-Speed Charge Coupled Device Camera

Analysis and control of short-circuit experience in short-circuit CO2 welding

Effects of Arc Bubble Behaviors and Characteristics on Droplet Transfer in Underwater Wet Welding Using In-Situ Imaging Method

Study on droplet transfer mechanical behavior in laser-MIG hybrid welding process

Random Nature of Droplet Size and Its Origins in Short Circuit Co2 Arc Welding

Instantaneous short circuit in short circuiting transfer process in GMAW

Effects of electrode polarity on the droplet transfer mode in self-shielded flux-cored arc welding

Effect of Forces on Dynamic Metal Transfer Behavior of Cable-Type Welding Wire Gas Metal Arc Welding

Simulation of Metal Droplet Sputtering and Molten Pool on Copper Contact under Electric Arc.

Arc Behavior and Droplet Transfer Analysis in AC-P-MIG Welding of Aluminum Alloys

Modeling of droplet short-circuiting transfer and simulation of three-dimensional transient behavior of molten pool

Research on Droplet Size of Short-Circuiting Transfer in CO2 Gas-Shielded Arc Welding Based on High-Speed Photography

An Analysis of Sheath Development of Cathode during the Instability Stage of Vacuum Arc

Modeling of Droplet Transfer Electrical Characteristics in Pulsed Gas Melted Arc Welding

Stability Analysis of Metal Active-Gas Welding Short-Circuiting Transfer Based on Input Pulsating Energy

Energy model of projected transfer with additional mechanical force in the welding process

Droplet formation and motion characteristics in seven-wire rotating arc electrogas welding

Investigation on droplet transfer behavior during fiber laser-flux cored arc hybrid welding