Abstract:In situ compressive behavior of carbon fibers reinforced PPS laminates. This study investigates the influence of a combined thermal heat flux (imposed by a cone calorimeter) and a compressive loading on the deformation and damage mechanisms within quasi‐isotropic carbon fibers reinforced thermoplastic (polyetherether ketone [PEEK] and polyphenylene sulfide [PPS]) and thermosetting (epoxy) laminates. First, thermogravimetric Analyses conducted under nitrogen provide valuable information on the thermal decomposition of these materials depending on the matrix nature (580–510°C and 350°C, respectively) which is a key factor to explain the mechanical behavior under fire conditions. Second, under the same testing conditions (creep loading under a 50 kW/m2 heat flux), the time to failure is about 17 times as high (C/PEEK), twice as high (C/PPS) with respect to C/epoxy laminates. At the ply scale, the exposure of thermoplastic matrices (PEEK and PPS) to a 50 kW/m2 heat flux causes softening and thermal decomposition, facilitating the micro‐buckling of fiber bundles in matrix‐rich areas. At the laminates scale, this mechanism ultimately leads to the formation and propagation of plastic kink bands in the transverse direction. In epoxy‐based laminates, the onset of matrix pyrolysis occurs at lower temperatures (350°C) during thermal aggression, and thermal decomposition has started in all the plies of the laminates. Combined with the low ductility of the epoxy matrix, the compressive response is elastic‐brittle and results from the buckling of 0° plies outside the thermally‐damaged area. Highlights Study on the compression of polymer composites exposed to a 50 kW/m2 heat flux. The influence of the matrix nature (thermoplastic vs thermoset) is discussed. Time to failure is about 17 times higher in C/PEEK compared to C/Epoxy. Plastic kink bands propagate in thermoplastic composites at T > Tg. C/Epoxy laminates undergo buckling outside the thermally damaged area.

Damage Analysis of Fiber Reinforced Resin Matrix Composites Irradiated by CW Laser

Comparison of the in situ compressive behavior of carbon fibers woven ply laminates exposed to one‐sided heat flux: Thermoplastic versus thermosetting composites

Mechanism and Behavior of Laser Irradiation on Carbon Fiber Reinforced Polyetheretherketone (CF/PEEK) During the Laser-Assisted In-Situ Consolidation Additive Manufacturing Process

Ablation behavior of glass fiber reinforced polybenzoxazine composites irradiated by high energy continuous-wave laser

Irradiation multi-scale damage and interface effects of 3D braided carbon fiber/epoxy composites subjected to high dose γ-rays

Experimental Investigation on Ablation Behaviors of CFRP Laminates in an Atmospheric Environment Irradiated by Continuous Wave Laser

Thermal response of carbon fiber reinforced epoxy composites irradiated by thermal radiation

Effect of thermal damage on dynamic and static mechanical properties of CFRP short pulse laser hole cutting

Damage Effect on Glass Fibre Reinforced Plastics under Airflow by a Continuous Wave Laser

Laser ablation mechanism and performance of glass fiber-reinforced phenolic composites: An experimental study and dual-scale modelling

Carbon fiber reinforced ZrC based ultra-high temperature ceramic matrix composite subjected to laser ablation: Ablation resistance, microstructure and damage mechanism

Damage in Carbon Fiber/epoxy Resin Composites under Explosive Impact

Thermal response during volumetric ablation of carbon fiber composites under a high intensity continuous laser irradiation

Laser ablation behavior and mechanism of Cf/C–SiC composites under different laser energy densities

Damage characterization and discrimination in laser-shocked carbon fiber reinforced polymer laminates: A mass-spring-damping model approach

Study of thermal and mechanical damage in optical material induced by high-power laser

Study of experimental and numerical simulation of high-energy laser processing on carbon fiber reinforced polymer

Mechanical properties of glass-fibre-reinforced composite posts after laser irradiation with different energy densities

Design and preparation of resin matrix composite coating with good ablation resistance performance under high-energy laser irradiation

Analytic Calculation and Evaluation of Thermal and Mechanical Damage in Optical Materials Induced by Laser

Analysis of the Mechanical Properties and Damage Mechanism of Carbon Fiber/Epoxy Composites under UV Aging