Abstract:In situ compressive behavior of carbon fibers reinforced PPS laminates. This study investigates the influence of a combined thermal heat flux (imposed by a cone calorimeter) and a compressive loading on the deformation and damage mechanisms within quasi‐isotropic carbon fibers reinforced thermoplastic (polyetherether ketone [PEEK] and polyphenylene sulfide [PPS]) and thermosetting (epoxy) laminates. First, thermogravimetric Analyses conducted under nitrogen provide valuable information on the thermal decomposition of these materials depending on the matrix nature (580–510°C and 350°C, respectively) which is a key factor to explain the mechanical behavior under fire conditions. Second, under the same testing conditions (creep loading under a 50 kW/m2 heat flux), the time to failure is about 17 times as high (C/PEEK), twice as high (C/PPS) with respect to C/epoxy laminates. At the ply scale, the exposure of thermoplastic matrices (PEEK and PPS) to a 50 kW/m2 heat flux causes softening and thermal decomposition, facilitating the micro‐buckling of fiber bundles in matrix‐rich areas. At the laminates scale, this mechanism ultimately leads to the formation and propagation of plastic kink bands in the transverse direction. In epoxy‐based laminates, the onset of matrix pyrolysis occurs at lower temperatures (350°C) during thermal aggression, and thermal decomposition has started in all the plies of the laminates. Combined with the low ductility of the epoxy matrix, the compressive response is elastic‐brittle and results from the buckling of 0° plies outside the thermally‐damaged area. Highlights Study on the compression of polymer composites exposed to a 50 kW/m2 heat flux. The influence of the matrix nature (thermoplastic vs thermoset) is discussed. Time to failure is about 17 times higher in C/PEEK compared to C/Epoxy. Plastic kink bands propagate in thermoplastic composites at T > Tg. C/Epoxy laminates undergo buckling outside the thermally damaged area.

Thermal response of carbon fiber reinforced epoxy composites irradiated by thermal radiation

Comparison of the in situ compressive behavior of carbon fibers woven ply laminates exposed to one‐sided heat flux: Thermoplastic versus thermosetting composites

Effect of Irradiation Grafting Epoxy on Surface Characteristics of Carbon Fibers and Mechanical Properties of Composites

The Effects of Irradiation Cross-Linking on the Thermal Degradation and Flame-Retardant Properties of the Hdpe/Eva/Magnesium Hydroxide Composites

Irradiation multi-scale damage and interface effects of 3D braided carbon fiber/epoxy composites subjected to high dose γ-rays

Temperature field study and numerical computation of carbon fiber epoxy composite materials under unilateral thermal radiation

Thermal response during volumetric ablation of carbon fiber composites under a high intensity continuous laser irradiation

Effect of Co60gamma Ray Irradiation for Carbon Fibre on Interfacial Properties in Epoxy Resin Composites

Thermal Aging Behavior of Carbon Fiber/Epoxy Composites at High Temperature

The Effect of Γ-Ray Radiating Carbon Fiber on Interfacial Property of Composite

Research on high-temperature mechanical behaviour of carbon/phenolic composites under ultra-high heating rates

Effect of thermal exposure on carbon fiber reinforced composites used in civil infrastructure rehabilitation

Irradiation Treatment of Multiwalled Carbon Nanotubes and Its Effect on the Thermal Properties of Their Composites with Epoxy Resin

Effect of the Γ-Radiation on the Properties of Epoxy-Based Shape Memory Polymers

Effect of Hydrothermal Environment on Mechanical Properties and Electrical Response Behavior of Continuous Carbon Fiber/Epoxy Composite Plates

Study on Space Combined Irradiation Damage of Carbon Fiber/epoxy Composite

Study on the Damage Effects of Electron and Proton Combined Irradiation on T700/Cyanate Composites

Mechanical Property Evolution and Life Prediction of Carbon Fiber and Pultruded Carbon Fiber Reinforced Polymer Plate Exposed to Elevated Temperatures

Microstructural evolutions of three-dimensional carbon–carbon composite materials irradiated by carbon ions at elevated temperatures

Damage in Carbon Fiber/epoxy Resin Composites under Explosive Impact

Analysis of the Mechanical Properties and Damage Mechanism of Carbon Fiber/Epoxy Composites under UV Aging