Abstract:Combustion behavior of single pulverized coals (PCs) and co-combustion characteristics of anthracite (AT) and bituminite (BT) blends with 20 wt.% volatile were studied by thermogravimetric experiments. The results indicated that reaction characteristics of PCs were closely related to their functional group structure and consequently, the pyrolysis of PCs with highly active functional groups initiated at lower temperatures. It was also noticed that the discrepancy of functional group structures between AT and BT might impair their interaction during combustion. The early exhaust of BT at low temperatures would possibly lead to an independent combustion of volatile and residual carbon and eventually the inefficient combustion of their blend. However, the mixing of AT and BT with similar functional group structures was more likely to achieve blends with superior combustion property. Simultaneously, non-isothermal kinetic analysis manifested that the combustion of blends followed random pore model (RPM), and therefore, the parameters calculated by RPM were more accurate to describe their combustion behavior. The kinetic calculation results showed that the activation energy required for decomposition of blends in early combustion stage was much lower owing to the excellent activity of volatile, while residual carbon with stable aromatic hydrocarbon demanded more energy to initiate its combustion.

Derivative Differential Thermal Method for Determining Igniting Point of Low-Volatile Blending Coals in Subsiding Furnace

Characterization on Ignition and Volatile Combustion of Dispersed Coal Particle Streams: in Situ Diagnostics and Transient Modeling

Experiment research of anthracite coal mixed burning in boiler

PREDICTION OF BURNING BEHAVIOR FOR PULVERIZED COAL AND ITS APPLICATION ON PRACTICAL BOILERS

STUDY ON IMPROVEMENT OF BURNING BEHAVIOR FOR INDONESIAN COAL AND ITS APPLICATION ON 300 MW UNITS

Impact of Coal Types and Pulverizing Methods on the Thermal Performance of Blending Coal-Fired Boilers and Their Operational Optimization

Investigations into the Ignition Behaviors of Pulverized Coals and Coal Blends in a Drop Tube Furnace Using Flame Monitoring Techniques

Ignition Characteristic of Blended Coal in a Drop-Tube Furnace

Non-isothermal Thermogravimetric Investigation on Mutual Effect Between Bituminite and Anthracite in Blends for Blast Furnace Injection

Experimental And Numerical Analyses On Ignition And Burnout Characteristic Of Low-Rank Lignite And Semi-Char Blends

Kinetic Study on Co-Combustion of Pulverized Anthracite and Bituminite for Blast Furnace Injection

Study on Coal Ash Fusion Characteristics with TG-DSC Method

Thermo-gravimetric Research on Dynamic Combustion Reaction Parameters of Blended Coals

Experimental study on the comprehensive behavior of combustion for blended coals

A New Method Based on Multi-heating Rate Methods for Coal Combustion Parameters

Thermogravimetric Analysis On The Combustion Characteristics For Blended Coals

Experimental investigation on ignition and burnout characteristics of semi-coke and bituminous coal blends

Volatile Releasing Characteristics of Pulverized Coals under Moderate or Intense Low-Oxygen Dilution Oxy-Combustion Conditions in a Flat-Flame Assisted Entrained Flow Reactor

Optimization of Numerical Models of MILD Combustion for Pulverized Coal

A DNS Study on Temporally Evolving Jet Flames of Pulverized Coal/biomass Co-Firing with Different Blending Ratios