Abstract:We propose a novel hybrid FPP-DIC technique to measure an object's shape and deformation in 3D simultaneously by using a single 3CCD color camera, which captures the blue fringe patterns and red fluorescent speckles within the same image. Firstly, red fluorescent speckles were painted on the surface of the specimen. Subsequently, 12 computer-generated blue fringe patterns with a black background were projected onto the surface of the specimen using a DLP projector. Finally, both the reference and deformed images with three different frequencies and four shifted phases were captured using a 3CCD camera. This technique employed a three-chip configuration in which red–green–blue chips were discretely integrated in the 3CCD color camera sensor, rendering independent capture of RGB information possible. Measurement of out-of-plane displacement was carried out through the implementation of Fringe Projection Profilometry (FPP), whereas the in-plane displacement was evaluated using a 2D Digital Image Correlation (DIC) method by leveraging a telecentric-lens-based optical system. In comparison to the traditional FPP-DIC hybrid methodology, the present approach showed a lower incidence of crosstalk between the fringe patterns and speckle patterns while also offering a corrective for the coupling of the in-plane displacement and out-of-plane displacement. Experimental results for the in-plane cantilever beam and out-of-plane disk comparisons with the traditional 3D-DIC method indicated that the maximum discrepancy obtained between FPP-DIC and 3D-DIC was 0.7 μm and 0.034 mm with different magnifications, respectively, validating the effectiveness and precision of the novel proposed FPP-DIC method.

Flexible Three-Dimensional Measurement Technique Based on A Digital Light Processing Projector

Embedded Three-Dimensional Shape Measurement System with Microprojector

3D Measurement System Based on Computer-Generated Gratings

Projection Algorithm for Laser Three Dimensional Measurement

A Projector Calibration Method for Fringe Projection System

High Accuracy Calibration Method for Multi-Line Structured Light Three-Dimensional Scanning Measurement System Based on Grating Diffraction.

Multi-projector Calibration and Alignment Using Flatness Analysis for Irregular-Shape Surfaces

Compact Design of Projection Lens for 3D Profilometry Based on Interferometric Fringes

An absolute phase to world coordinates method for the defocusing structured light shape measurement system

High-speed 360 3D shape measurement based on visual stereo phase unwrapping method

Automatic Geometrical Calibration for Multiprojector-Type Light Field Three-Dimensional Display

Computer Aided Projection Fringe System for 3-D Shape Measurement

Self‐calibration Three‐dimensional Light Field Display Based on Scalable Multi‐lcds

Calibration of a 3D Measurement System Having One Camera and One Projector

Three-dimensional shape measurement with a fast and accurate approach.

Fast and high-accuracy three-dimensional shape measurement using intermediate-bit projection

A novel projector ray-model for 3D measurement in fringe projection profilometry

A three-dimensional vision measurement method based on double-line combined structured light

Three-Dimensional Shape and Deformation Measurements Based on Fringe Projection Profilometry and Fluorescent Digital Image Correlation via a 3 Charge Coupled Device Camera

3D Small-Field Imaging System

Dual-projector structured light 3D shape measurement.