Abstract:Polymeric nanocomposites have gained attention over the past few decades for their enhanced thermal stability and degradation. However, the reactions involved in a polymer nanocomposite can vary significantly from system to system, making it necessary to investigate novel nanofillers in search for more effective materials. Nanocomposites comprised of alpha-zirconium phosphate (ZrP) nanosheets in poly (methyl methacrylate) (PMMA) were prepared with a wide range of nanoparticle loadings (0, 5, 10, and 30 wt.% ZrP in PMMA). The ZrP nanocomposites were characterized using UV-visible spectroscopy (UV-vis), x-ray diffraction (XRD), thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC). Nanocomposites were well dispersed and optically transparent as shown by XRD and UV-vis. However in the UV region, transparent ZrP nanocomposites possessed excellent UV scattering properties, significantly reducing the transmittance of UV-light, while remaining transparent to the visual spectrum. Thermal stability studies using TGA and DTG showed the peak mass loss rate (PMLR) was reduced by 10% and simultaneously shifted to higher temperatures by 41 °C. Since the nanocomposites in this work cover such a large range of ZrP loadings, large amounts of high-temperature residuals were encountered after TGA studies, indicating that the high loading ZrP nanocomposites are largely noncombustible. In addition, DSC studies showed that ZrP content does affect the glass transition temperature, but not enough to limit the application in which ZrP nanocomposites could be used. These results point to ZrP nanocomposites being useful as polymer replacements, behaving like polymers until the event of a fire, in which case they are largely noncombustible.

Effect of Zirconium(Iv) Propoxide Concentration on the Thermophysical Properties of Hybrid Organic-Inorganic Films

Thermal Stability of Optically Transparent Alpha-Zirconium Phosphate/Poly(methyl Methacrylate) Nanocomposites with High Particle Loading

PREPARATION AND STUDY ON STRUCTURE OF THE POLYIMIDE/SILICA HYBRID AND NANOCOMPOSITE FILMS

Fabrication and Properties of Thermosensitive Organic/inorganic Hybrid Hydrogel Thin Films.

THE THERMAL OPTICAL PROPERTIES OF POLY (METHYL METHACRYLATE) SOLID FILMS DOPED BY AZO DYES

Synthesis and Characterization of PMMA-ZrO2 (SiO2, TiO2, Al2O3) Organic-Inorganic Hybrid Materials

Preparation and Thermochromic Properties of Sol-Gel-derived Zr-doped VO 2 Films

Investigation of thermo-optical characteristic of the organic-inorganic hybrid material

Synthesis and Characterization of PMMA-ZrO<sub>2</sub>(SiO<sub>2</sub>,TiO<sub>2</sub>,Al<sub>2</sub>O<sub>3</sub>) Organic-Inorganic Hybrid Materials

Dielectric Properties and Thermal Expansion of ZrW2 O8 /polyimide Hybrid Films

Preparation, combustion and thermal behaviors of UV-cured coatings containing organically modified α-ZrP

Transparent Poly(methyl Methacrylate)/silica/zirconia Nanocomposites with Excellent Thermal Stabilities

Preparation of Zirconia/Organosilicone Thin Film by Sol-Gel Method

Effect of Embedded g-C3N4 Nanosheets on the Hydration and Thermal Response Behavior of Cross-Linked Thermoresponsive Copolymer Films

Effect of mole ratios of precursors on properties and structure of organic-inorganic films

Effect of Surface Organic Functional Modification of ZrB2 Nanosize Multiphase Ceramics on the Thermal Properties of Its Composites

Effect of titanium dioxide and zirconium dioxide nanoparticle incorporation on the thermal conductivity of heat-activated polymethylmethacrylate denture base resins: An in vitro experimental study

Thermal and optical properties of P3HT:PC70BM:ZnO nanoparticles composite films

Controlled Construction of Surface Hybrid Structures of Zirconium Powder Assisted by Microdroplets and Photopolymerization Collaboration

Trialkoxysilane‐capped Acrylic Resin/titania Organic–inorganic Hybrid Optical Films Prepared by the Sol–gel Process

High Refractive Index and Good Mechanical Property Uv-Cured Hybrid Films Containing Zirconia Nanoparticles