Abstract:As a promising replacement for nitride red phosphors, Ce: Y3(Mg1.8Al1.4Si1.8)O12(Ce: YMASG) ceramic phosphors have attracted significant attention recently for their advantages in inorganic encapsulation and massive red‐shifting of Ce3+ emission. In this work, Ce: YMASG with different doping concentrations of Ce3+ and Al2O3, was fabricated by vacuum sintering to investigate its effects on the elimination of the impurity phase and the enhancement of the luminescent properties of white light‐emitting diodes (w‐LEDs). It was discovered that the emission wavelength redshifts from 592 nm to 606 nm as the Ce3+ concentration increases, while at 450 K, the emission intensity deteriorates from 0.47 to 0.36 of its initial value. The Rietveld analysis revealed the presence of an impurity phase of Y4MgSi3O13 with a concentration of 17.021 wt% in Ce: YMASG. With the introduction of Al2O3, the impurity phase was eliminated from the matrix completely, the emission peak shifted to a shorter wavelength, and the thermal stability was greatly improved. When the correlated color temperature was controlled at around 3000 K in the packaged w‐LEDs, the commission international de l'éclairage (CIE) chromaticity coordinates shifted toward the bottom left corner of the diagram with increasing concentration of Ce3+. Conversely, the luminous efficiency (LE) increased from 36 lm/W to 58.6 lm/W as the concentration of Al2O3 increased from 0 to 10 wt%, which demonstrated the application prospect of the fabricated phosphor in warm w‐LEDs.

Effect of Sc Substitution for Al on the Optical Properties of Transparent Ce : Ysag Ceramics

Effects of Ga Substitution for Al on the Fabrication and Optical Properties of Transparent Ce:Gagg-Based Ceramics

Cation-substitution Induced Stable GGAG:Ce3+ Ceramics with Improved Optical and Scintillation Properties

An in depth characterization of the spectroscopic properties and laser action of 10 at% Yb doped Y3ScxAl5-xO12 (x = 0.25, 0.5, 1.0, 1.5) transparent ceramics

Spectroscopic Properties Of Er3+/Yb3+ Co-Doped 50sio(2)-20al(2)O(3)-30caf(2) Glass And Glass Ceramics

Ce3+, Pr3+ Co-Doped Lu3Al5O12 Single Crystals and Ceramics: A Comparative Study

Ce:YScAG Phosphor-Converted Transparent Ceramics with High Thermal Saturation and Weak Concentration Quenching for LED and LD White Lighting

Structural and Scintillation Properties of Ce3+:Gd3Al3Ga2O12 Translucent Ceramics Prepared by One-Step Sintering

Weak thermal quenching and tunable luminescence in Ce:Y3(Al,Sc)5O12 transparent ceramics for high power white LEDs/LDs

Tunable luminescence Y3Al5O12:0.06Ce 3+, xMn2+ phosphors with different charge compensators for warm white light emitting diodes

Study of Composite Al2O3-Ce:Y3Mg18Al14Si18O12 Ceramic Phosphors

Massive Red-Shifting of Ce3+ Emission by Mg2+ and Si4+ Doping of YAG:Ce Transparent Ceramic Phosphors

Spectroscopic Properties of Er3+/Yb3+ Co-Doped 50sio2–20al2o3–30caf2 Glass and Glass Ceramics

Sintering of GGAG:Ce3+, Xy(3+) Transparent Ceramics in Oxygen Atmosphere

Effect of Scandium Concentration in the Y2O3–Sc2O3–Al2O3–Er2O3 Oxide Composition on the Thermophysical Properties of Optical Ceramics

Cr 3+ ions improving the spectral properties of YAG: Ce 3+ luminescent ceramics for white LD lighting

Tunable luminescence Y_3Al_5O_12:006Ce^3+, xMn^2+ phosphors with different charge compensators for warm white light emitting diodes

Study of composite Al 2 O 3 -Ce:Y 3 Mg 1.8 Al 1.4 Si 1.8 O 12 ceramic phosphors.

Ce3+ doped Lu3Al5O12 ceramics prepared by spark plasma sintering technology using micrometre powders: Microstructure, luminescence, and scintillation properties

Scintillation Properties and Effect of Thermal Annealing in Lu3Al5O12:Ce and Lu3Al5O12:Pr Ceramics

Optimization of Ce 3+ concentration and Y 4 MgSi 3 O 13 phase in Mg 2+ ‐Si 4+ Co‐doped Ce: YAG ceramic phosphors