Abstract:As a promising replacement for nitride red phosphors, Ce: Y3(Mg1.8Al1.4Si1.8)O12(Ce: YMASG) ceramic phosphors have attracted significant attention recently for their advantages in inorganic encapsulation and massive red‐shifting of Ce3+ emission. In this work, Ce: YMASG with different doping concentrations of Ce3+ and Al2O3, was fabricated by vacuum sintering to investigate its effects on the elimination of the impurity phase and the enhancement of the luminescent properties of white light‐emitting diodes (w‐LEDs). It was discovered that the emission wavelength redshifts from 592 nm to 606 nm as the Ce3+ concentration increases, while at 450 K, the emission intensity deteriorates from 0.47 to 0.36 of its initial value. The Rietveld analysis revealed the presence of an impurity phase of Y4MgSi3O13 with a concentration of 17.021 wt% in Ce: YMASG. With the introduction of Al2O3, the impurity phase was eliminated from the matrix completely, the emission peak shifted to a shorter wavelength, and the thermal stability was greatly improved. When the correlated color temperature was controlled at around 3000 K in the packaged w‐LEDs, the commission international de l'éclairage (CIE) chromaticity coordinates shifted toward the bottom left corner of the diagram with increasing concentration of Ce3+. Conversely, the luminous efficiency (LE) increased from 36 lm/W to 58.6 lm/W as the concentration of Al2O3 increased from 0 to 10 wt%, which demonstrated the application prospect of the fabricated phosphor in warm w‐LEDs.

Massive Red-Shifting of Ce3+ Emission by Mg2+ and Si4+ Doping of YAG:Ce Transparent Ceramic Phosphors

Elevating photoluminescence properties of Y3MgAl3SiO12:Ce3+ transparent ceramics for high-power white lighting

Optimization of Ce 3+ concentration and Y 4 MgSi 3 O 13 phase in Mg 2+ ‐Si 4+ Co‐doped Ce: YAG ceramic phosphors

Spectrum Regulation of Yag:Ce Transparent Ceramics with Pr, Cr Doping for White Light Emitting Diodes Application

Red-emitting YAG: Ce, Mn transparent ceramics for warm WLEDs application

(Sr, Ca)AlSiN3:Eu2+ Phosphor-Doped YAG:Ce3+ Transparent Ceramics as Novel Green-Light-Emitting Materials for White LEDs

Crystallization and Fluorescence Properties of Ce:Yag Glass-Ceramics with Low Sio2 Content

Tunable luminescence Y3Al5O12:0.06Ce 3+, xMn2+ phosphors with different charge compensators for warm white light emitting diodes

Ce:YScAG Phosphor-Converted Transparent Ceramics with High Thermal Saturation and Weak Concentration Quenching for LED and LD White Lighting

Red Emission Generation in Ce3+/Mn2+ Co-Doping Y3Al5O12 Phosphor Ceramics for Warm White Lighting Emitting Diodes

Tunable luminescence Y_3Al_5O_12:006Ce^3+, xMn^2+ phosphors with different charge compensators for warm white light emitting diodes

Significant enhancement of luminescence properties of YAG:Ce ceramics by differential grain sizes control

Investigation of a thermally robust orange-red MgO-YMASG: Ce composite phosphor ceramic for white light LED/LD illumination

An orange-yellow-emitting Lu<sub>2-<i>x</i></sub>Mg<sub>2</sub>Al<sub>2-<i>y</i></sub>Ga<sub><i>y< /i></sub>Si<sub>2</sub>O<sub>12</sub>:<i>x</i>Ce<SUP>3+</SUP> phosphor-in-glass film for laser-driven white light

Effect of extra added Mg2+ and Si4+ on the microstructure and luminescence properties of Ce:YAG ceramic phosphors for high power LED/LD lighting

Study of Composite Al2O3-Ce:Y3Mg18Al14Si18O12 Ceramic Phosphors

Study of composite Al 2 O 3 -Ce:Y 3 Mg 1.8 Al 1.4 Si 1.8 O 12 ceramic phosphors.

Weak thermal quenching and tunable luminescence in Ce:Y3(Al,Sc)5O12 transparent ceramics for high power white LEDs/LDs

Cr 3+ ions improving the spectral properties of YAG: Ce 3+ luminescent ceramics for white LD lighting

Broadband Emission Gd3Sc2Al3O12:Ce3+ Transparent Ceramics with a High Color Rendering Index for High-Power White LEDs/LDs.

The Analyses of Structure and Luminescence in (Mgyy3-Y) (Al5-Ysiy)o12 and Y3(MgxAl5-2xSix)O12 Ceramic Phosphors