Abstract:This work aims to study a possible modification in the electronic structure of scandia-ceria-stabilized zirconia (10Sc1CeSZ) ceramics sintered at different temperatures. In addition to using X-ray diffraction (XRD), scanning electron microscopy (SEM) and impedance spectroscopy to investigate the structural and electrical properties, we employed X-ray photoelectron spectroscopy (XPS) to determine the chemical state information of the atoms involved, along with compositional analysis. As expected, a significant increase in grain ionic conductivity with the sintering temperature was present. This increase was accompanied by a decrease in the porosity of the samples, an increase in the grain size, and a transformation from the rhombohedral to the cubic phase. The phase transformation was detected not only using XRD, but also using XPS and, for this type of ceramic, XPS detected this transformation for the first time. In addition to the changes in the structural characteristics, the increase in the ionic conductivity was accompanied by a modification in the electronic structure of the ceramic surface. The XPS results showed that the surface of the ceramic sintered at the lower temperature of 1100 °C had a higher amount of Zr-OH bonds than the surface of the ceramic sintered at the higher temperature of 1400 °C. The existence of these Zr-OH bonds was confirmed using Fourier-transform infrared spectroscopy (FTIR). From this result, taken together with the difference between the oxygen/zirconium ratios in these ceramics, also identified using XPS, we conclude that there were fewer oxygen vacancies in the ceramic sintered at the lower temperature. It is argued that these two factors, together with the changes in the structural characteristics, have a direct influence on the conductive properties of the studied ceramics sintered at different temperatures.

Effect of Scandium Concentration in the Y2O3–Sc2O3–Al2O3–Er2O3 Oxide Composition on the Thermophysical Properties of Optical Ceramics

Synthesis of YSAG:Er ceramics and the study of the scandium impact in the dodecahedral and octahedral garnet sites on the Er3+ energy structure

Influence of Yb3+ content on the optical and thermophysical properties of YSAG:Yb:Er solid solutions

Effect of Sc Substitution for Al on the Optical Properties of Transparent Ce : Ysag Ceramics

An in depth characterization of the spectroscopic properties and laser action of 10 at% Yb doped Y3ScxAl5-xO12 (x = 0.25, 0.5, 1.0, 1.5) transparent ceramics

Influence of Rare Earth Elements and Radiation on Spectral Properties and Thermal Conductivity of Yttrium Aluminum Garnets and Phosphate Glasses

THE COMBINED EFFECT OF SINTERING ADDITIVES MgO AND TEOS ON THE STRUCTURE AND OPTICAL PROPERTIES OF CERAMICS YAG:Yb, Er

Phase Composition, Crystal Structure and Microwave Dielectric Properties of Nb-Doped Yttrium Aluminum Garnet Ceramics

Optical, Thermal, and Mechanical Properties of (Y1-xScx)2O3 Transparent Ceramics

Optical, thermal, and mechanical properties of (Y1−xScx)2O3 transparent ceramics

Effect of Aluminum Substitution on the Structural, Magnetic, and Magnetothermal Properties of Yttrium Iron Garnet

Spectroscopic Properties Of Er3+/Yb3+ Co-Doped 50sio(2)-20al(2)O(3)-30caf(2) Glass And Glass Ceramics

Effect of Heterogeneous Phases on Thermal-Mechanical Properties and CMAS Corrosion Resistance of (sc0.33er0.33yb0.34)2si2o7 Ceramics

Effects of Al substitution on dielectric response and magnetic behavior of yttrium iron garnet ceramics

Scandium and Gadolinium Co-Doped BaTiO3 Nanoparticles and Ceramics Prepared by Sol–gel–hydrothermal Method: Facile Synthesis, Structural Characterization and Enhancement of Electrical Properties

X-ray Photoelectron Spectroscopy Analysis of Scandia-Ceria-Stabilized Zirconia Composites with Different Transport Properties

Preparation and properties of novel (Tb1-xCex)3Sc2Al3O12 magneto-optical transparent ceramics with different doping concentrations

Effects of Er3+ and Yb3+ Concentrations on Upconversion Luminescence and Thermal Sensing Characteristics of Sc2O3:Er3+/Yb3+ Phosphors

The scandium effect in Gd-rich BMGs: How and why does this ingredient work better than others?

Effect of Sintering Conditions on the Microstructure and Electrochemical Properties of 6Scandia 1Ceria co-doped Zirconia (6Sc1CeZr)

Dependence of Spectroscopic and Thermal Properties on Concentration and Temperature for Yb:Y2o3 Transparent Ceramics