Abstract:Phase selection and amorphous transition play a significant role for controlling of the microstructure and properties of multi-component alloys. In the present work, the solidified microstructure evolution of Fe52-xCo20NixB19Si5Nb4 (x = 7,12, labeled as 7 Ni, 12 Ni) alloys were studied in a wide range of cooling rate, and the effect of phase constitutions on the magnetic and micromechanical properties were systematically investigated. The results show that the microstructures of the two master alloys are composed of alpha-Fe, gamma-Fe, Fe2B and Nb6Co16Si7 phases. As the solid solubility increases, the content of the intermetallic Nb6Co16Si7 phase decreases or even disappears, while the metastable Fe3B phase and Fe23B6 phase grow competitively. With the rise of the cooling rate, there is a transition from eutectic microstructure to internal amorphous structure plus peripheral crystalline/amorphous composite, and then to complete amorphous state in the two alloys. For the 7 Ni alloy, when the droplet diameter reduces, the coercivity of the alloy decreases continuously. As the content of the main magnetic alpha-Fe phase decreases, the saturation magnetization of the alloy diminishes firstly, and then slightly heightens when it is completely amorphous. From the perspective of solid solubility, the difference in hardness of the alpha-Fe and Fe2B phases with the undercooling is clarified. The hardness of the amorphous phase is slightly lower than that of the Fe2B phase. Finally, the nanoindentation technique was used to explore the indentation size effect and creep behavior of amorphous composite under different peak loads and different loading rates. As the peak load decreases or the loading rate increases, the hardness and elastic modulus of the alloy enhance, while the maximum creep displacement, stress factor and activation volume all increase with the rise of the peak load.

The Compositional Range of Amorphous Phase Formation and Thermal Stability of Al90−xFe5Ni5Cex

Phase Selection and Characterization of Fe-based Multi-Component Amorphous Composite

Enhanced thermal stability of amorphous Al-Fe alloys by addition of Ce and Mn

Preparation and properties of FeNiMnCuC0.2Alx high-entropy alloy

Amorphization in the AlC System by Mechanical Alloying

Effect of the addition of cerium on the microstructure evolution and thermal expansion properties of cast Al-Cu-Fe alloy

Study of amorphous phase in Fe100-x(NbTiTa)x alloys synthesized by mechanical alloying and its effect on the crystallization phenomenon

Mechanical Alloying, Fine Structure and Thermal Decomposition of Nanocrystalline Fcc-Fe60cu40

Experimental Investigation of the Al–Ce–Ni System at 800°C

Precipitation of an Icosahedral Phase in Amorphous Al90Fe5Ce5alloy

Disordered nanocrystalline Al65Fe25Ni10 alloy powder prepared by mechanical alloying

Influence Of Al Addition On The Thermal Stability And Mechanical Properties Of Fe76.5-Xcu1si13.5b9alx Amorphous Alloys

Microstructure and Mechanical Properties of Ti44Al6Nb Alloys with Different Cerium Contents

Uncovering the effects of Ce and superheat temperature on Fe-rich intermetallic and microporosity formation in aluminum alloy

Precipitation of an Icosahedral Phase in Amorphous Al90fe5ce5 Alloy

Effect of Ce Content on the Microstructure of Semisolid Mg-10Al Alloy

The Phase Equilibria of the Al–Ce–Ni System at 500°C

Microstructural evolution and thermal stability in a nanocrystalline lightweight TiAlV0.5CrMo refractory high-entropy alloy synthesized by mechanical alloying

Formation of Fe–Nb–X (x=zr, Ti) Amorphous Alloys from Pure Metal Elements by Mechanical Alloying

Effect of Ce Addition on Martensitic Transformation Behavior of TiNi Shape Memory Alloys

Influence of increasing Al concentration on phase, microstructure and mechanical behaviors of Ni1.5CoFeCu1−xAlxV0.5 high entropy alloys