Abstract:The solid dissolution of Fe atoms into Cu matrix induced by mechanical alloying and subsequent thermal decomposition of Fe atoms from the solid solution in composition of Fe60Cu40 have been studied by X-ray diffraction (XRD), Mossbauer spectroscopy and the extended X-ray absorption fine structure (EXAFS) technique. The disappearance of elemental Fe and Cu XRD peaks and the presence of FCC structural XRD peaks illustrate the formation of FCC-Fe60Cu40 solid solution. Meanwhile, the new sextet spectrum with a broadening hyperfine magnetic field distribution also demonstrates that the alloying is on an atomic level and there exist complex coordination environments in the solid solution. EXAFS results Further prove the reality of atomic alloying from the clear observation of Fe atoms taking on FCC coordination in the solid solution. Additionally, a large reduction in the first shell coordination number for a center iron atom but not for a center Cu atom indicates the composition non-uniformity, which suggests that Fe atoms enrich the surface while Cu atoms enrich the core of a FCC nanocrystal. The variation of Mossbauer spectra against the annealing temperatures during thermal decomposition indicates that the Fe atoms at the surface readily nucleate and cluster into alpha -Fe at a temperature slightly below 250 degreesC, whereas the Fe atoms in the core of nano-sized crystals first cluster into gamma -Fe cohering to the FCC matrix at a temperature about 350 degreesC and then transform to alpha -Fe for further annealing at a higher temperature or for a longer time. (C) 2001 Elsevier Science B.V. All rights reserved.

Precipitation of an Icosahedral Phase in Amorphous Al90Fe5Ce5alloy

Study on Precipitation in (cocrfemnni)90al6ti4 High Entropy Alloy

Icosahedral Phase in Rapidly Cooled Al-Fe-Ce Alloy

Precipitation of Nano-Scale Icosahedral Quasicrystalline Phase in Amorphous Hf73pd27 Alloy

Formation of Ti-Zr(Hf)-Ni-Cu Amorphous Alloys and Quasicrystal Precipitation Upon Annealing

The Crystallization Kinetics Study of Finemet-Co Amorphous Alloys

Precipitation of Nano-Scale Icosahedral Quasicrystalline Phase in Amorphous Hf70Ni10Pd20 Alloy

Crystallization of Amorphous Zr60Al15Ni25 Alloy

Crystallization of the rapidly solidified amorphous aluminum alloy Al88Ce2Ni10

Precipitation of Nanoscale Icosahedral Quasicrystalline Phase in Amorphous Hf70cu20pd10 Alloy

Amorphization in the AlC System by Mechanical Alloying

Formation of AlCuFe icosahedral quasicrystal by mechanical alloying: XAFS and XRD studies

3D Morphology and Formation Process of the Icosahedral Quasicrystalline Phase in Rapidly Solidified Al–Mn Alloy

Crystallization process of Zr60Ni25Al15 amorphous alloy

Effect of Quenching Condition on Micro Inhomogeneous Structure of Al-Fe-Ce Amorphous Alloy

Sem Study of Quasi-Crystallized Zr65cu12.5ni10al7.5ag5 Amorphous Alloy at Initial Stage

Precipitation of Nanoscale Icosahedral Quasicrystalline Phase in Hf–Cu Amorphous Alloy Promoted by the Addition of Ni

Crystallization of high stable Zr55Al10Ni5Cu30 bulk amorphous alloy

Mechanical Alloying, Fine Structure and Thermal Decomposition of Nanocrystalline Fcc-Fe60cu40

Investigation on structural stability of as-cast Al0.5CrCuFeMnTi high entropy alloy

Growth and morphology evolution of icosahedral quasicrystal phase in Mg 30Zn 60Y 10 alloy