Abstract:In present study, the nanoscale assignment behavior of strain and stress state at the interface of T2-Al6CuLi3/α-Al matrix is investigated by Transmission Electron Microscope (TEM) combined with Geometric phase analysis (GPA) method. The obtained results reveal the toughening effect of the icosahedral quasicrystalline phase T2-Al6CuLi3 on cast Al-Li alloys. It is found that the precipitation of T2-Al6CuLi3 phase consumes Li atoms in competition with δ'-Al3Li phase during the aging process, which damages yield stress (YS) and Young's modulus of alloy. Compared with Base alloy, the yield stress and Young's modulus of the Quasicrystalline alloy decrease 2.39% and 22.26%, respectively. A flat and smooth interface morphology of T2-Al6CuLi3/α-Al matrix is observed in high-resolution images. Furthermore, the distribution state of the nanoscale strain shows that the matrix with higher ductility suffered most strain when the sample is subjected to the applied load. Meanwhile, the quasicrystalline phase T2 compresses during the precipitation process, which suppresses the crack initiation and propagation along the interface of the T2-Al6CuLi3/α-Al matrix. The assignment behavior of strain contributes to the enhancement of ductility and toughness of the alloy, partially alleviating the intergranular brittle fracture tendency which is common in Al-Li alloys. It is observed that the existence of quasicrystalline phases improves the elongation (EL) and product of strength and ductility (PSD) by 62.5% and more than five times without the loss of the ultimate tensile stress (UTS). Therefore, the present study provides a promising reference for the design of the quasicrystal-reinforced cast Al-Li alloys.

Precipitation of Nano-Scale Icosahedral Quasicrystalline Phase in Amorphous Hf73pd27 Alloy

Precipitation of Nano-Scale Icosahedral Quasicrystalline Phase in Amorphous Hf70Ni10Pd20 Alloy

Precipitation of Nanoscale Icosahedral Quasicrystalline Phase in Amorphous Hf70cu20pd10 Alloy

Precipitation of Nanoscale Icosahedral Quasicrystalline Phase in Hf–Cu Amorphous Alloy Promoted by the Addition of Ni

Formation of Ti-Zr(Hf)-Ni-Cu Amorphous Alloys and Quasicrystal Precipitation Upon Annealing

Precipitation of Icosahedral Quasicrystalline Phase in Hf69.5Al7.5Ni11Cu12 Metallic Glass

Precipitation of Icosahedral Quasicrystalline Phase in Hf65Al7.5Ni10Cu12.5Pd5 Metallic Glass

The Crystallization Kinetics Study of Finemet-Co Amorphous Alloys

Study on Precipitation in (cocrfemnni)90al6ti4 High Entropy Alloy

Nanoscale Icosahedral Quasicrystal Phase Precipitation Mechanism During Annealing for Mg–Zn–Gd-based Alloys

Studies of Structure Evolution of Nanostructured Hf11ni89 Alloy

Crystallization of Bulk Amorphous Alloy (Fe40ni40p14b6)(96)ga-4 in Supercooled Liquid Region

Precipitation of Nano-Scale Icosahedral Quasicrystalline Phase in Hf-Al-Ni-Cu Metallic Glass Promoted by Addition of Ti

Precipitation Behavior of Heusler Phase (ni 2 AlHf) in Multiphase NiAl Alloy

Early Stages of Precipitation in Γ' Phase of a Ni–Al–Ti Model Alloy: Phase-Field and First-Principles Study

Glassy and Icosahedral Phases in Rapidly Solidified Ti–Zr–Hf–(Fe, Co or Ni) Alloys

Structural phase transition in the Hf–Ni system studied by ab initio calculation and ion beam mixing

Formation of Amorphous and Icosahedral Phases in Ti–Zr–Hf–LTM (ltm=ni, Pd or Pt) Alloys

Crystallization of Amorphous Zr60Al15Ni25 Alloy

Influence of rolling on the precipitation of icosahedral quasicrystalline phase in Zr-Al-Ni-Cu-Ag amorphous alloy

Nanoscale Phase Separation and Local Icosahedral Order in Amorphous Alloys of Immiscible Elements