Abstract:Ni/Al reactive multilayer foils were fabricated by cold rolling method and self-propagating reactions in these foils were investigated. A two-stage phase formation process was observed in the ignition experiment. The first step is the lateral growth of Al 3 Ni phase from isolated nucleation sites and the following coalescence into a continuous layer; the second step is the growth of such Al 3 Ni layers in the perpendicular direction of the interface until all Al is consumed. As there is still Ni available, Al3Ni will continuously react with Ni until no Ni is left, and the final reaction product turns out to be ordered B2 AlNi compound. X-ray diffraction (XRD) experiments showed that the reaction product of the cold rolled foil was the same as the physical vapor deposition (PVD) foil. The reaction process was studied by differential scanning calorimetry (DSC). Three peaks can be identified from the DSC curve. Cold rolled foils were heated to different peak temperatures obtained from DSC curve with the same heating rate as DSC. XRD results for such foils showed that the first two peaks were the exothermic formation of Al3Ni, while the last one was for the formation of AlNi. The enthalpy of the reaction for the cold rolled foil was calculated to be -57.5 KJ/mol, which was in good agreement with the formation enthalpy of AlNi (-59 KJ/mol). The reaction velocities of the first formation stage were measured to be 7mm/s for cold rolled foils, which were much smaller than the reaction velocities of PVD foils (which range between 1-30 m/s).

Step-wise exothermic reactions in pvd and cold-rolled Ni/Al multilayer foils

Fabrication and Characterization of Cold Rolled Ni/Al Multilayer Foils

Combustion Synthesis Reaction Behavior of Cold-Rolled Ni/Al and Ti/Al Multilayers

Combustion Synthesis Reactions in Cold-Rolled Ni/Al and Ti/Al Multilayers

Rolling Temperature on the SHS Reaction of Rolled Al/Ni Reactive Multilayer Foils

Review on Al/Ni reactive multilayer foils

Oxidation behavior at 1100 °C of NiCrAlY coatings deposited by various PVD techniques

Chemical reactions of Ni/Al multilayers upon ultrahigh compressive load at ambient temperature

Influence of Oxide Formation Following Ultrashort Pulsed Laser Micromachining on Self‐Propagating Reactions in Free‐Standing Ni/Al Reactive Multilayer Foils

A Reaction Study for Al–Ni2O3 Nano Self-Exothermic Materials

Fabrication and Characterization of Al/NiO Energetic Nanomultilayers

REACTION MECHANISM OF CONTINUALLY HEATING Ni AND A1 PARTICLES

Alloying propagation in nanometric Ni/Al multilayers: A molecular dynamics study

Interdiffusion of Ni-Al multilayers: a continuum and molecular dynamics study

Layered Structure of Ni-Al Multi-Layered Metal-Intermetallic Composites Fabricated by In-Situ Reactions

Effects of Stepped Heating on the Initial Growth of Oxide Scales on NiCrAlHf Bond Coat Alloy under Air and Water Vapor Atmospheres

Synthesis of bulk reactive Ni–Al composites using high pressure torsion

Reaction behaviors occurring in Ti/Al foil metallurgy

Mechanical Properties and Oxidation Formation of Eb-Pvd Deposited Ni-Cr-Al Alloy

Oxidation Behaviors of NiCrCoAl Superalloy Sheet Prepared by EB-PVD at 1000℃

Thermodynamic interpretation of reactive processes in Ni-Al nanolayers from atomistic simulations