Abstract:In this paper, numerical simulations were performed for the fouling characteristics and heat transfer performance after fouling on the H-type finned tube heat exchangers, and the optimum parameters studies were also conducted according to the orthogonal array design method. Firstly, the effect of row number on the fouling results were discussed. It was found that there was a critical row number N-cr = 6, and the fouling results will reach a constant value when the row number is larger than the critical row number. Then, the orthogonal array design method was employed to design the test arrangements, and the effects of six geometric parameters and two operating conditions on the fouling results as well as heat transfer performance after fouling were investigated. The order of the effects of each factor and the optimum parameters corresponding to the least fouling and best heat transfer performance after fouling were also determined. At last, a correlation of the Nusselt number after fouling Nut with the geometric parameters and the operating conditions was obtained. The results showed that the optimum conditions we determined using the orthogonal array design method do have less fouling or have better heat transfer performance after fouling than the reference cases in the test arrangements. The correlation of Nut has good prediction accuracy, and it can be useful in the design and evaluation of heat exchanger in dusty environment. (C) 2017 Elsevier Ltd. All rights reserved.

TAGUCHI INVESTIGATION OF PARAMETRIC STUDY ON THE PERFORMANCE OF INTERNALLY LONGITUDINALLY FINNED TUBE WITH SINUSOIDAL WAVY FIN

Experimental Study and Numerical Simulation on Convective Heat Transfer and Pressure Drop of Internally Longitudinal Finned Tube

Turbulent Heat Transfer Performance of Internally Longitudinally Finned Tubes

Experimental and numerical investigation on the flow and heat transfer characteristics of the tube with an integrated internal longitudinal fin

Numerical Investigation On The Heat Transfer Enhancement Behavior Outside Longitudinal Finned Tubes

Experimental Study on the Pressure Drop and Heat Transfer Characteristics of Tubes with Internal Wave-Like Longitudinal Fins

Experimental and numerical investigation on flow and heat transfer characteristics of a multi-waves internally spiral finned tube

Parametric Study and Optimization of H-type Finned Tube Heat Exchangers Using Taguchi Method

Convective Heat Transfer and Pressure Drop of a Tube with Internal Longitudinal Fins

Numerical Investigation of Slit Fin at Different Reynolds Numbers: A Sensitivity Analysis and Optimization by Taguchi Methodology

Computational analysis of heat transfer and pressure drop performance for internally finned tubes with three different longitudinal wavy fins

Investigation of Turbulent Flow and Heat Transfer in Periodic Wavy Channel of Internally Finned Tube with Blocked Core Tube

Numerical Investigation Of Effect Of Tube Shape On Air-Side Heat Transfer And Pressure Drop Characteristics Of A Finned Tube Heat Exchanger

Convective Heat Transfer and Pressure Drop of Annular Tubes with Three Different Internal Longitudinal Fins

Effect of lateral fin profiles on turbulent flow and heat transfer performance of internally finned tubes

Parametric Study and Optimization of Cast Al-Si Alloy Heat Exchanger Using Taguchi Method

Numerical study on flow and heat transfer characteristics of a novel centrosymmetric tube with bent inner fins based on experiment

Experimental Study on the Pressure Drop and Heat Transfer of Two Different Tubes With Plain-Rectangle Internal Fins

Parameter Study on the Fouling Characteristics of the H-type Finned Tube Heat Exchangers

Effect of Blocked Core-Tube Diameter on Heat Transfer Performance of Internally Longitudinal Finned Tubes

Experimental and Numerical Investigation of Thermal -Hydraulic Performance in Wavy Fin-and-flat Tube Heat Exchangers