Abstract:Sintered NdFeB magnets are being utilised in numerous applications because of the excellent magnetic properties. However, due to its main components are Fe, B and rare earth metals. There is a potential difference between the neodymium rich phase, boron rich phase and the main phase, which was very easy to form a primary battery and cause electrochemical corrosion on the surface of the material. After the materials are easy to be corroded or the components and structures change, the performance of the materials will become weak or even lost, which will affect the service performance and life of the devices or equipment. According to the requirements of surface protection technology for NdFeB magnets, the preparation of protective coating by magnetron sputtering was an efficient means to enhance the corrosion resistance of magnets. Pure Al coating was deficient in microstructure, hardness and corrosion resistance, and the preparation of composite coating by doping co-sputtering had become a development trend. In the current work, AlTi coatings with various Ti contents were prepared from an Al target and a Ti target using direct and radio frequency hybrid magnetron co-sputtering. The surface morphology, microstructure, and elemental compositions of the AlTi coatings were explored through XRD (X-ray diffraction), SEM (scanning electron microscopy), and EDS (energy dispersive spectroscopy). The anticorrosion performances of the AlTi coatings were evaluated by performing electrochemical tests. According to SEM and EDS, the AlTi composite coating was denser and more homogeneous than that of the Al single layer. Furthermore, the results demonstrated that microcrystalline Ti doping reduced the grain size of Al coatings. Therefore, the corrosion current density of the sintered NdFeB magnets plated with Al(120w)/Ti(10w) was approximately more than a hundred times inferior to that of the pure Al layer, and the hardness of AlTi composite coatings also improved.

Improved adhesion of electroless Ni-P coatings on sintered Nd-Fe-B magnets by pre-plating in ultrasonic field

EFFECTS OF ULTRASONIC ELECTROLESS Ni- P PLATING ON THE CORROSION RESISTANCE OF SINTERED NdFeB MAGNETS

Preparation of coatings with high adhesion strength and high corrosion resistance on sintered Nd–Fe–B magnets through electroless plating

Effect of electroless deposition on the corrosion resistance property for NdFeB permanent magnets with surface coating of Ni-P alloy

Electroless Deposition of Ni-Co-P Deposit on NdFeB Permanent Magnets and Its Corrosion Resistance Property

Effects of Nd3+ on adhesion and corrosion resistance of electroless Ni-P coating on sintered Nd-Fe-B magnets

Corrosion Protection of Nd-Fe-B Sintered Magnets by Aluminum Coating

Fabrication and performance of Ni-Co-P/Si3N4 electroplated composite coatings on al-si alloys

Electroless Ni-Co-P Coatings on Sintered Nd-Fe-B Magnets with Improved Corrosion Resistance

Electrodeposition of amorphous Ni–P coatings onto Nd–Fe–B permanent magnet substrates

Corrosion behavior and strengthening mechanism of Ni-Cu alloy coating on Nd-Fe-B magnets

Corrosion Behavior of Sintered NdFeB Magnets Coated with Ni Coatings Deposited by Ion Beam Sputtering

Improving the thermal stability of sintered NdFeB magnets with nickel electroplating by high temperature treatment

Synthesis of Ni/nano-Al 2 O 3 coatings by brush plating with magnetic fields

Synthesis and Characterization of Ultrasonic-Assisted Electroplated Co–P Films with Amorphous and Nanocrystalline Structures

Magnetic Properties and Biocompatibility of Different Thickness (Pd/Fe)n Coatings Deposited on Pure Ti Surface via Multi Arc Ion Plating

The Influence of Magnetic Field Orientation on the Efficacy and Structure of Ni-W-SiC Coatings Produced by Magnetic Field-Assisted Electrodeposition

Microstructures of Al coatings prepared through magnetron co-sputtering with microcrystalline Ti doping

Effect of post-sintering annealing on microstructure and coercivity of Al85Cu15-added NdFeB sintered magnets

Study on Preparation and Wear Resistance of Nicrbsi-Wc/Co Composite Coatings by Pulsed Magnetic Field Assisted Supersonic Plasma Spraying

Electrochemical corrosion behaviors and corrosion protection properties of Ni–Co alloy coating prepared on sintered NdFeB permanent magnet