Abstract:Grey cast iron releases energy in the form of stress waves when damaged. To analyse the evolution of the physical and mechanical properties and acoustic emission characteristics of grey cast iron under uniaxial compression, acoustic emission signals were collected at different rates (0.5, 1, and 2 mm/s). Combined with load-time curves, damage modes were identified and classified using the parametric RA-AF correlation analysis method. The results indicate the loading rate effects on the strength, deformation, acoustic emission (AE), and energy evolution of grey cast iron specimens. The acoustic emission counts align with the engineering stress–strain response. To better illustrate the entire failure process of grey cast iron, from its internal microstructure to its macroscopic appearance, X-ray diffraction (XRD) and optical microscopy (OM) were employed for qualitative and quantitative analyses of the material's internal microstructural characteristics. The equivalent crystal model of grey cast iron was constructed using a Particle Flow Software PFC2D 6.00.30 grain-based model (GBM) to simulate uniaxial compression acoustic emission tests. The calibration of fine parameters with indoor test results ensured good agreement with numerical simulation results. Acoustic emission dynamically monitors the compression process, while discrete element particle flow software further analyses the entire damage process from the inside to the outside. It provides a new research method and idea for the study of crack extension in some metal materials such as grey cast iron.

Electronical Measurement of Fracture Process of Cast Iron Incision Specimen and Calculation of the Structure Bearing Capacity

Analysis of Concrete Fracture Process and Size Effect

Depth-sensing Indentation Measurement and Finite Element Analysis of Residual Stress Field Near Fatigue Crack Tip

OPENING DISPLACEMENT AND STRESS DISTRIBUTION OF COHESIVE CRACK IN CAST IRON

Measurement on Fracture Process and Analysis on Mechanical Performance of Steel Fiber Reinforced Concrete

EXPERIMENTAL STUDY OF THE BEARING CAPACITY OF INTERNAL|EXTERNAL FLANGE JOINTS SUBJECTED TO PRESSURE AND BENDING LOADINGS WITH VARIOUS ECCENTRICITIES

Numerical Simulation of Fracture and Damage Behaviour of Concrete at Different Ages

Fracture Experiment and Load-Bearing Capacity Analysis for Notched Ceramics Three-Point Bending Beam

Component Structural Equivalent Research Based on Different Failure Strength Criterions and the Theory of Critical Distance

A Numerical Analysis with Scaled Boundary Finite Element Method to Simulate Mixed-mode Crack Propagation for Concrete Beams

Calculation and Experiment on Cohesive Resistance Crack of Quasi-Brittle Materials

Experimental investigation and calculation on fracture parameter of rock specimens with medium or small size

The Loading Capacity of Three Point Bending Beam With the Resistant Force of Cohesive Crack

Wedge-splitting Electrical Measurement Experimental Study on the Steel Fiber Reinforced Concrete

Damage evolution and fracture behavior of different materials specimens containing a central hole subjected to local loading

Probing Internal Damage in Grey Cast Iron Compression Based on Acoustic Emission and Particle Flow

Investigation of Fracture Mechanisms of Cast Iron by Means of Situ Observation

Determination of Fracture Parameters in Center Cracked Circular Discs of Concrete under Diametral Loading: A Numerical Analysis and Experimental Results

Fracture of 0.1 and 2 M Long Mortar Beams under Three-Point-bending

A new test method for the complete load-displacement curve of concrete under mixed mode I-II fracture

Quantitative characterization and mechanism analysis on thickness-dependent size effect of concrete fracture