Abstract:The crack extension resistance and fracture properties are studied in detail for quasi-brittle materials like concrete with a softening traction-separation law by investigating the complete fracture process. The computed samples are the three-point bending notched beams of concrete with different sizes tested by other researchers. The softening traction-separation law which was proposed by Reinhardt et al. based on direct tension tests for normal concrete materials was chosen in the computations. Different distribution shapes of the cohesive force on the fictitious crack zone were considered for the corresponding loading states. The computations were mainly based on the analytic solutions for this problem using Gauss–Chebyshev quadrature to achieve the integration which is singular at the integral boundary. The crack extension resistance curves in terms of stress intensity (K R -curves) were determined by combining the crack initiation toughness K_ Ic^ini that is the inherent toughness of the material needed to resist the crack initiation in the case that is in the lack of an extension of the main crack with the contribution due to the cohesive force along the fictitious crack zone during the complete processes of fracture. The situation of crack propagation can be judged by comparing K R -curves of crack extension resistance with the stress intensity factor curves which were calculated using the lengths of the extending crack and the corresponding loads at each loading states, e.g., when the crack extension resistance curve(K R -curve) is lower than the stress intensity factor curve, the crack propagation is stable; otherwise, it is unstable. In the computation, the obtained relationship between the crack tip opening displacement CTOD and the amount of crack extension for the complete fracture process is in agreement with the testing results of other researchers.

Calculation and Experiment on Cohesive Resistance Crack of Quasi-Brittle Materials

Cohesive Cracking Simulation of Concrete Using Effective Modulus

Mesoscopic numerical test of crushing process of concrete under uniaxial compression

Towards Fully Automatic Modelling of the Fracture Process in Quasi-Brittle and Ductile Materials: a Unified Crack Growth Criterion

3D Finite Element Simulation of Complex Static and Dynamic Fracture in Quasi-Brittle Materials

Monte Carlo simulation of complex cohesive fracture in random heterogeneous quasi-brittle materials

Progress in Complex 2d and 3d Cohesive Fracture Modelling Considering Random Heterogeneity

Mechanical properties and numerical simulation of crack interface in reinforced concrete

Monte Carlo Simulation of Complex 2D Cohesive Fracture in Random Heterogeneous Quasi-Brittle Materials

Crack Extension Resistance and Fracture Properties of Quasi-Brittle Softening Materials like Concrete Based on the Complete Process of Fracture

Finite Element Modelling of Complex 3D Static and Dynamic Crack Propagation by Embedding Cohesive Elements in Abaqus

Experimental and Numerical Investigation on the Tensile Fracture of Compacted Clay

Numerical Simulation of Fracture and Damage Behaviour of Concrete at Different Ages

Analysis on cohesive crack opening displacement considering the strain softening effect

STUDY OF CONCRETE FRACTURE PROCESS ZONE BASED ON FICTITIOUS CRACK MODEL

A Cohesive Model-Based Nonlinear Discontinuous Deformation Analysis for Tensile Fracture in Geotechnical Materials

Numerical Analysis for Crack Width of Reinforced Concrete Beam with Bond-Slip Effect

Improved Discontinuous Deformation Analysis Method for Modeling Tensile Cracking in Quasi-Brittle Materials

The Loading Capacity of Three Point Bending Beam With the Resistant Force of Cohesive Crack

ANALYSIS AND CRITERION OF FRACTURE PROCESS FOR CRACK PROPAGATION IN CONCRETE

CALCULATATION METHOD OF THE LENGTH OF FRACTURE PROCESS ZONE OF CONCRETE