Abstract:The results of experimental investigations using laser speckle interferometry on small size three-point bending notched beams and using photoelastic coating and the strain gauges on very large size compact tension specimens of concrete are presented in detail. The investigations showed that there exists a stage of stable crack propagation before unstable fracture occurs. The results are in agreement with other researchers' investigations using moire interferometry, holographic interferometry, dye-impregnation method and microscope. Further detailed study shows that the three different states, i.e., crack initiation, stable crack propagation and unstable fracture can be distinguished in the fracture process in concrete structures. In order to predict the crack propagation during the fracture process in quasi-brittle materials a double-K criterion is proposed. The double-K criterion consists of two size-independent parameters. Both of them are expressed in terms of the stress intensity factors. One of them reflects the initial cracking toughness, denoted with K ini , which can be directly evaluated by the initial cracking load, P ini , and the precast crack length, a 0 , using a formula of LEFM. The other one refers to the unstable fracture toughness, denoted with K un , which can be obtained inserting the maximum load, P max , and the effective crack length, a, into the same formula of LEFM. The values of the two parameters, K Ic ini and K Ic un , obtained from the small size three-point bending notched beams and the large size compact tension specimens show that K Ic ini and K Ic un are size-independent. Evaluating with the K-resistance curves obtained from the same test data, it is found that the proposed double-K criterion is equivalent to it in basic principle, but, the double-K criterion can be applied more easily than the K-resistance curve. Finally, as a practical example, the application of the double-K criterion to the prediction of the crack propagation in a concrete dam is discussed.

Crack Extension Resistance and Fracture Properties of Quasi-Brittle Softening Materials like Concrete Based on the Complete Process of Fracture

Crack Extension Resistance Based on the Cohesive Force in Concrete

Correlation Between Tension Softening Relation and Crack Extension Resistance in Concrete

Numerical Simulation of Fracture and Damage Behaviour of Concrete at Different Ages

Experimental study on fracture properties of self-compacting concrete

Determination of double-Determination of double- K criterion for crack propagation in quasi-brittle fracture Part I: experimental investigation of crack propagation

ANALYSIS AND CRITERION OF FRACTURE PROCESS FOR CRACK PROPAGATION IN CONCRETE

Calculation and Experiment on Cohesive Resistance Crack of Quasi-Brittle Materials

Monte Carlo simulation of complex cohesive fracture in random heterogeneous quasi-brittle materials

Monte Carlo Simulation of Complex 2D Cohesive Fracture in Random Heterogeneous Quasi-Brittle Materials

Towards Fully Automatic Modelling of the Fracture Process in Quasi-Brittle and Ductile Materials: a Unified Crack Growth Criterion

The Loading Capacity of Three Point Bending Beam With the Resistant Force of Cohesive Crack

Fracture Simulation of Concrete Beams to assess softening behavior by varying different fractions of Aggregates

Determination of crack extension resistance of concrete from boundary effect model

The new GR crack extension resistance as a fracture criterion for complete crack propagation in concrete structures

Fracture Toughness of Ordinary Plain Concrete Under Three-Point Bending Based on Double-K and Boundary Effect Fracture Models

Occurrence Condition for Steady Crack Propagation in Quasi-Brittle Fracture and Its Application in Determining Initial Fracture Toughness

Effect of Size and Cohesive Assumptions on the Double-K Fracture Parameters of Concrete

Experimental Investigation On Mode Ii Fracture Toughness K-Iic Of Concrete And Fracture Behavior

Determination of double- K criterion for crack propagation in quasi-brittle fracture, Part II: Analytical evaluating and practical measuring methods for three-point bending notched beams

A new method for determining the tension-softening curve of concrete