Abstract:The cohesive model as an effective tool is capable of analyzing the size effect, progressive failure process, and the influence of the crack on concrete structures. Basic concept and definition of concrete cohesive model in the light of fracture process zone (FPZ) are introduced. The common methods used for the softening characterization of the concrete are then summarized, and they are primarily based on the following approaches: direct tensile tests of notched samples, J-integral approach, fracture energy and toughness, inverse approach, and R-curve method. As an application of cohesive model, the cohesive failure modeling and simulation of concrete beams under Mode-I, mixed-mode, and fatigue loading are illustrated. The size effect based on concrete cohesive model is discussed. Comparisons of the cohesive model with other two models (i.e., crack zone strip model and crack bridging model) are discussed in detail. Limitations of cohesive model in engineering applications are pointed out, and they may summarized as follows: (1) The cohesive model is primarily suitable for the crack under one dominant tensile stress; while the actual situation is under multiple stresses (e.g., the compressive stress may have an effect on cohesive failure). (2) Most of cohesive model assumes that the crack line is straight and the dissipation energy focuses near the crack tip. In fact, both the fracture surface (not necessarily along a straight crack line) and base materials have a pronounced effect on the fracture energy and cohesive failure. (3) Conventional cohesive model assumes that the nonlinearity (softening) only exists in the crack tip region where the stress reaches the limiting stress and the separation of material under tensile Mode-I loading occurs. Thus, the cohesive zone is referred to the area surrounding the crack tip, and the material outside this zone is taken as linear elastic. (4) Non-local behavior of cohesive model should be considered. (5) Effect of nonlinear stress on cohesive model should be further studied. To promote research and development of the cohesive model in concrete, the following aspects should be further investigated: (1) detection of crack initiation and softening under 3-D stresses; (2) mixed mode fracture mode under large shear deformation; (3) time dependent behavior of crack propagation and related material changes due to crack; (4) the stress-strain constitutive relationship for nonlinear base materials; (5) effects of cyclic loading history and order, cyclic loading frequency and magnitude, size, and fatigue life on the cohesive model.

Crack Extension Resistance Based on the Cohesive Force in Concrete

EXTEND FINITE ELEMENT NUMERICAL SIMULATION FOR CRACK PROPAGATION OF FIBER CONCRETE

Crack Extension Resistance and Fracture Properties of Quasi-Brittle Softening Materials like Concrete Based on the Complete Process of Fracture

Cohesive Cracking Simulation of Concrete Using Effective Modulus

The Loading Capacity of Three Point Bending Beam With the Resistant Force of Cohesive Crack

Determination of crack extension resistance of concrete from boundary effect model

Numerical Analysis for Crack Width of Reinforced Concrete Beam with Bond-Slip Effect

Correlation Between Tension Softening Relation and Crack Extension Resistance in Concrete

Numerical simulation of cracking of early-age concrete three-point beams

Mechanical properties and numerical simulation of crack interface in reinforced concrete

Simulation of crack growth in reinforced concrete beams using extended finite element method

Numerical Simulation of Fracture and Damage Behaviour of Concrete at Different Ages

Fracture Toughness of Ordinary Plain Concrete Under Three-Point Bending Based on Double-K and Boundary Effect Fracture Models

The new GR crack extension resistance as a fracture criterion for complete crack propagation in concrete structures

ADVANCES IN CONCRETE COHESIVE CRACK MODELS

An embedded crack model for finite element analysis of concrete fracture

Flexural behavior of high-strength, steel-reinforced, and prestressed concrete beams

Experimental investigation and modified calculation model of critical crack propagation length of concrete

A new method for determining the tension-softening curve of concrete

NUMERICAL SIMULATION OF FAILURE PROCESS OF THREE-POINT BENDING CONCRETE BEAM CONSIDERING HETEROGENEITY OF TENSILE STRENGTH AND POST-PEAK SOFTENING CURVE

Nonlinear Finite Element Analysis of Deep Reinforced Concrete Coupling Beams