Abstract:The crack extension resistance and fracture properties are studied in detail for quasi-brittle materials like concrete with a softening traction-separation law by investigating the complete fracture process. The computed samples are the three-point bending notched beams of concrete with different sizes tested by other researchers. The softening traction-separation law which was proposed by Reinhardt et al. based on direct tension tests for normal concrete materials was chosen in the computations. Different distribution shapes of the cohesive force on the fictitious crack zone were considered for the corresponding loading states. The computations were mainly based on the analytic solutions for this problem using Gauss–Chebyshev quadrature to achieve the integration which is singular at the integral boundary. The crack extension resistance curves in terms of stress intensity (K R -curves) were determined by combining the crack initiation toughness K_ Ic^ini that is the inherent toughness of the material needed to resist the crack initiation in the case that is in the lack of an extension of the main crack with the contribution due to the cohesive force along the fictitious crack zone during the complete processes of fracture. The situation of crack propagation can be judged by comparing K R -curves of crack extension resistance with the stress intensity factor curves which were calculated using the lengths of the extending crack and the corresponding loads at each loading states, e.g., when the crack extension resistance curve(K R -curve) is lower than the stress intensity factor curve, the crack propagation is stable; otherwise, it is unstable. In the computation, the obtained relationship between the crack tip opening displacement CTOD and the amount of crack extension for the complete fracture process is in agreement with the testing results of other researchers.

Analysis on cohesive crack opening displacement considering the strain softening effect

Experimental and Numerical Investigation on the Tensile Fracture of Compacted Clay

Calculation and Experiment on Cohesive Resistance Crack of Quasi-Brittle Materials

Application of Cohesive Zone Model in Crack Propagation Analysis in Multiphase Composite Materials

Computation of the crack opening displacement in the phase-field model

Progress in Complex 2d and 3d Cohesive Fracture Modelling Considering Random Heterogeneity

Monte Carlo Simulation of Complex 2D Cohesive Fracture in Random Heterogeneous Quasi-Brittle Materials

Improved Discontinuous Deformation Analysis Method for Modeling Tensile Cracking in Quasi-Brittle Materials

Towards Fully Automatic Modelling of the Fracture Process in Quasi-Brittle and Ductile Materials: a Unified Crack Growth Criterion

Monte Carlo simulation of complex cohesive fracture in random heterogeneous quasi-brittle materials

Cracking Behavior and Acoustic Emission Characteristics of Rock Containing a Single Preexisting Flaw

STUDY ON CLOSING LAW OF CRACK IN ROCK MASS UNDER COMPRESSION

STUDY OF CONCRETE FRACTURE PROCESS ZONE BASED ON FICTITIOUS CRACK MODEL

Crack Extension Resistance and Fracture Properties of Quasi-Brittle Softening Materials like Concrete Based on the Complete Process of Fracture

Occurrence Condition for Steady Crack Propagation in Quasi-Brittle Fracture and Its Application in Determining Initial Fracture Toughness

Effects of infilling materials on mechanical behaviors and cracking process of pre-cracked rock: Insights from a hybrid continuum-discontinuum method

Effects of the Cohesive Law on Ductile Crack Propagation Simulation by Using Cohesive Zone Models

Crack propagation mechanism in rock-like specimens containing intermittent flaws under shear loading

OPENING DISPLACEMENT AND STRESS DISTRIBUTION OF COHESIVE CRACK IN CAST IRON

Experimental and numerical study on crack propagation and coalescence in rock-like materials under compression

Stable Crack Propagation Model of Rock Based on Crack Strain