Abstract:The rotating scanning strategy is a critical factor for top surface roughness in laser-powder bed fusion (L-PBF), yet the underlying mechanism remains elusive. This study introduces an integrated L-PBF model, encompassing powder packing and molten pool fluid dynamics analysis, to investigate how surface roughness accumulates across layers with non-rotating scans but is mitigated with rotating scans. To address computational complexity and prediction errors associated with multi-layer simulations, the model utilizes an experimentally built part as substrate and simulates single-layer depositions with varying scanning rotation angles. Additionally, an as-machined surface representing ideal flat substrate is included for comparative analysis. Results indicate that on as-built surfaces featuring alternating peak-valley patterns, both powder packing structure and fusion zone shape are location-dependent. To effectively characterize the packing structure on such non-flat surfaces, an effective packing density is proposed. Specifically, peak locations exhibit a thinner powder layer, a 14.5% increase in effective packing density, and a 7% decrease in penetration depth compared to valley locations. The circulation flow, driven by recoil pressure and Marangoni force, is responsible for the reduced surface roughness with rotating scans. Specifically, the circulation flow intersects with multiple peaks and valleys, effectively promoting material redistribution among these tracks and disrupting the peak-valley patterns. Conversely, the peak-valley patterns are preserved and may propagate to subsequent layers with non-rotating scans.

Radial Drift During Polar Laser Direct Writing

Sub-diffraction Optical Beam Lithography Based on a Center-Non-zero Depletion Laser

Laser Direct Writing System and Its Lithography Properties

Reduction of Coating Induced Polarization Aberrations by Controlling the Polarization State Variation

Optimal Polarization Modulation for Orthogonal Two-Axis Lloyd’s Mirror Interference Lithography

Optical Vortex Beam Direct-Writing Photolithography

Research on the optical field distribution and micro-fabrication model in convex-surface laser lithography

Dynamic Gaussian Model of Linewidth in Defocus Writing

The Effect of Polarization Control in Loss-Compensated Recirculating Delayed Self-Heterodyne Interferometry Measurement of Laser Linewidth

Aberration Precompensation Laser Direct Writing Within Lithium Niobate Crystals(Invited)

Optimization of S-curve intensity control model for laser direct writing

Enhanced Spindle System For Polar Laser Direct Writer

Numerical Analysis of Rotating Scans' Effect on Surface Roughness in Laser-Powder Bed Fusion

Experimental and Numerical Analysis on the Leading-Edge Bulge Effect During the Recoating Process in Ceramic Stereolithography

High-resolution Laser Lithography Based on Vortex Laser and Composite Layer

Linewidth Control by Overexposure in Laser Lithography

Overexposure control for stabilizing linewidth

Research on focusing system characteristics and defocusing application in laser direct writer

Numerical Simulation and Experimental Research on Reduction of Taper and HAZ During Laser Drilling Using Moving Focal Point

Effect of Coating-Induced Polarization Aberrations on the Focusing Properties in High Numerical Aperture Optical System

A Laser Direct Writing Close-Up Method Based on Laser Intensity S-curve Control