Abstract:Adding lanes is a common method to increase the capacity at intersections. The additional turning lanes are often limited by the road configuration. The paper presents a probabilistic model to calculate the total capacity at signalized intersections for a full through lane and an additional left-turn lane. The proposed model has an advantage over current estimation methodologies by considering not only stochastic arrivals of vehicles but also the signal timing plan, especially signal phasing sequence. Two blockage situations under this channelization form arc taken into account. The proposed capacity model shows that the capacities of the through and left-turn movements are related to the proportion of the through traffic volume, the length of the additional turning lane, and the effective green time of both through and left-turn signal phases. It is also found that the through capacity increases with the increase of the proportion of the through traffic and the length of the additional lane, whereas the left-turn capacity declines with an increase of the proportion of the through traffic but increases with an increase of the length of the additional lane. Both capacities decrease with the increase of the green time when the g/C ratio is fixed. The proposed model is compared with design recommendations and verified using the microscopic traffic software VISSIM as well as field data. The results show that the capacities obtained by theoretical models are consistent with the simulated results, and have an advantage over the design recommendations. The capacity models can provide theoretical suggestions for the design of additional turning lanes and signal timing plans. (C) 2018 American Society of Civil Engineers.

Research on Saturation Flow of Right-Turning Lane at Signalized Intersection

Analysis om waiting area for left-turn vehicles at signalized intersections

An Analysis of the Interactions between Adjustment Factors of Saturation Flow Rates at Signalized Intersections

Modelling the saturation flow rate for continuous flow intersections based on field collected data

Calculation method of travel time of right-turn vehicle at motor-and nonmotor-vehicle mixed traffic intersection

Research on mixed use inspection of straight right lane and bus lane

Lane-Based Saturation Degree Estimation for Signalized Intersections Using Travel Time Data

Modeling Capacity of Shared Right-Turn Lanes at Signalized Intersections Considering the Lag Green Time of Right-Turns

Estimation of Saturation Degree for Lane Groups at Signalized Intersections Using Video Imaging Detection Data

Saturation flow rate analysis for special width approach lanes: An empirical study in Karlsruhe, Germany.

Simulation of Departure Flow Profile at Stop Lines for Signal Approach Spillover

A study on the capacity of exclusive right-turn lanes of at-grade intersections

Critical Condition for Setting Left-turn Waiting Area

Empirical Analysis of Traffic Flow Characteristics at Variable Approach Lanes

Modeling Capacity at Signalized Intersections with a Left-Turn Storage Bay Considering Signal Timing Plan

Influence of Stretching-Segment Storage Length on Urban Traffic Flow in Signalized Intersection

Method of computing left-turn vehicle traffic capacity at two-phase intersection

Relationship of Lane Width to Saturation Flow Rate on Urban and Suburban Signalized Intersection Approaches

Operational Efficiency Evaluation of Intersections with Dynamic Lane Assignment Using Field Data

Influence of signal on the capacity of signalized intersection

Critical Traffic Volume of Traffic Signal Warrant at Major-Minor Intersections