Abstract:An efficient intersection signal scheme is of vital significance to urban traffic operation. At present, multiperiod fixed-timing control is still the traffic signal control method adopted by many urban intersections. For the optimization problem of signal scheme selection at signalized intersections, we proposed three two-step prediction optimization methods that match the traffic arrival in different periods with the corresponding optimal signal scheme, aimed at reducing the total delay of vehicles at signalized intersections. The first method predicts the traffic flow in each entrance direction of the intersection by minimizing the mean square error (MSE), then obtains the total vehicle delay of each scheme in the signal scheme set through the Highway Capacity Manual 2010 delay formula, and finally substitutes it into the signal optimization model to obtain the optimal scheme combination. The second method directly predicts the total vehicle delay at intersections of all signal schemes by minimizing the MSE and then substitutes it into the signal optimization model to obtain the optimal scheme combination. The third method directly predicts the total vehicle delay at intersections of all signal schemes by minimizing both the MSE and the prediction error between every two schemes and then substitutes it into the signal optimization model to obtain the optimal scheme combination. Verification based on actual intersection shows that better optimization results can be obtained by integrating optimization objectives into the prediction process. Besides, some practical insights can be drawn through applicability analysis and sensitivity analysis. First, the proposed model is more suitable for intersections where traffic arrivals vary greatly. Second, with the increase of scheme differences within a certain range, the advantages of the proposed method become more obvious. Finally, it is necessary to balance the flexibility of traffic control with control effectiveness in practical applications.

Lane-Based Saturation Degree Estimation for Signalized Intersections Using Travel Time Data

Estimation of Saturation Degree for Lane Groups at Signalized Intersections Using Video Imaging Detection Data

Traffic Demand Estimation for Lane Groups at Signal-Controlled Intersections Using Travel Times from Video-Imaging Detectors

Identification of oversaturated intersections using high-resolution traffic signal data

A Traffic Signal Control Algorithm for an Oversaturated Isolated Intersection Based on Video Detection Data

A Fuzzy Control Method Of Arterial Intersection Signal That Based On Saturation Equilibrium

Simulation of Departure Flow Profile at Stop Lines for Signal Approach Spillover

Study on the Saturation Flow Rate and Its Influence Factors at Signalized Intersections in China

Automatic Estimation Method for Intersection Saturation Flow Rate Based on Video Detector Data

Investigation of Saturation Flow on Shared Right-Turn Lane at Signalized Intersections

Estimation of saturation flow rates at signalized intersections

Quantification of Congestion in Signalized Intersection Based on Loop Detector Data

Grouped Travel Time Estimation in Signalized Arterials Using Point-to-point Detectors

Developing Adjustment Factors of Saturation Flow Rates at Signalized Intersections

A Semi-"Smart Predict, then Optimize" Method for Traffic Signal Control.

Intersection Signal Timing Optimization Method Based on Dynamic Saturation Flow Rate

Optimization Method of Signal Timing Parameters Considering Comprehensive Efficiency of All Approach Lanes

Identification of Oversaturated Traffic Conditions Based on Loop Detection

The Measurement Of Saturation Flow Rate At Signalized Intersection

Estimating Maximum Queue Length for Traffic Lane Groups Using Travel Times from Video-Imaging Data

Analysis of Saturation Flow Rate and Delay at Signalized Intersection