Abstract:An efficient intersection signal scheme is of vital significance to urban traffic operation. At present, multiperiod fixed-timing control is still the traffic signal control method adopted by many urban intersections. For the optimization problem of signal scheme selection at signalized intersections, we proposed three two-step prediction optimization methods that match the traffic arrival in different periods with the corresponding optimal signal scheme, aimed at reducing the total delay of vehicles at signalized intersections. The first method predicts the traffic flow in each entrance direction of the intersection by minimizing the mean square error (MSE), then obtains the total vehicle delay of each scheme in the signal scheme set through the Highway Capacity Manual 2010 delay formula, and finally substitutes it into the signal optimization model to obtain the optimal scheme combination. The second method directly predicts the total vehicle delay at intersections of all signal schemes by minimizing the MSE and then substitutes it into the signal optimization model to obtain the optimal scheme combination. The third method directly predicts the total vehicle delay at intersections of all signal schemes by minimizing both the MSE and the prediction error between every two schemes and then substitutes it into the signal optimization model to obtain the optimal scheme combination. Verification based on actual intersection shows that better optimization results can be obtained by integrating optimization objectives into the prediction process. Besides, some practical insights can be drawn through applicability analysis and sensitivity analysis. First, the proposed model is more suitable for intersections where traffic arrivals vary greatly. Second, with the increase of scheme differences within a certain range, the advantages of the proposed method become more obvious. Finally, it is necessary to balance the flexibility of traffic control with control effectiveness in practical applications.

A Method of Signal Timing Optimization for Spillover Dissipation in Urban Street Networks

A Green Wave Band Based Method for Urban Arterial Signal Control

Integration of Model-Based Signal Control and Queue Spillover Control for Urban Oversaturated Signalized Intersection

Method of Spillover Identification in Urban Street Networks Using Loop Detector Outputs

Identification of Spillovers in Urban Street Networks Based on Upstream Fixed Traffic Data

Signal coordination control for traffic bottleneck using OD data

Real-time Decentralized Traffic Signal Control for Congested Urban Networks Considering Queue Spillbacks

Intersection Control Considering Channelized Section Spillback Using a Flexible Phase Plan

Prompt Prediction of Spillovers in Urban Street Networks by Using Rolling Time Occupancy Data

Gating Control for a Single Bottleneck Link Based on Traffic Load Equilibrium

A Decentralized Model Predictive Traffic Signal Control Method with Fixed Phase Sequence for Urban Networks.

Study on Signal Timing Methods of Optimizing Urban Transportation Network Efficiency

Simulation of Departure Flow Profile at Stop Lines for Signal Approach Spillover

Optimization of Stretching-Segment Design and Signal Timing in Traffic Control

A Semi-"Smart Predict, then Optimize" Method for Traffic Signal Control.

Field‐tested Signal Controller to Mitigate Spillover Using Trajectory Data

Reliability Optimization of Signalized Intersection Coordinated Control under Oversaturated Condition

Signal control optimization for urban traffic against incident-induced congestion

Queue Spillover Management In A Connected Vehicle Environment

Optimization of Signal Timing for Urban Expressway Exit Ramp Connecting Intersection

A Back-Pressure-Based Model With Fixed Phase Sequences for Traffic Signal Optimization Under Oversaturated Networks