Abstract:The granular motion of binary-size mixture in a three-dimensional rotating drum operating in the rolling regime is numerically tracked via the discrete element method (DEM), with a focus on the axial dispersion behavior of the different particle types in response to the inherent size-segregation. Accordingly, the evolution with time, the frequency distribution and the space-time profiles of the axial dispersion coefficients are evaluated. The results demonstrate that (i) the fast radial segregation gives rise to the sharp increase and decrease of the axial dispersion coefficients of respectively the large and small particles in both the active and passive regions; (ii) the axial dispersion coefficients in the active region is an order-of-magnitude higher than that in the passive region; (iii) after the radial segregation, the frequency distributions of the axial dispersion coefficients of the large particles, the small particles and all the particles are normal distributions; (iv) the greatest axial dispersion coefficients of both particle types are at the upper part of the active region near the bed surface; (v) increasing the rotating speed and particle diameter ratio clearly enhances the axial dispersion intenstity in the active and passive regions; and (vi) axial segregation results in the greatest axial dispersion near the end walls, while most of the rest of the drum exhibit equally low axial dispersion. The results obtained here contribute towards understanding the dynamical response of the axial dispersion of different particle types to the inevitable radial and axial segregation phenomena, and are expected to be valuable for improving operations and advancing theoretical models of such granular systems with constituents of different sizes.

Three Dimensional Numerical Simulation of Mixing Process of Particles in Rotary Dryer

Simulation of Biomass Pyrolysis in a Rotary Drum by Coupling CFD-DEM with a One-Dimensional Thermally Thick Model

Studying on the Upper Limit of the Coarse-Grained DEM Model for Simulating Mixing Processes in a Rolling Drum with Complex Wall Boundary

Optimal Design of an Angular Box for a Mixed Flow Grain Dryer

On the Applicability of the Coarse Grained Coupled CFD-DEM Model to Predict the Heat Transfer During the Fluidized Bed Drying of Pharmaceutical Granules

Numerical Study of Particle Behaviours and Heat Transfer in a Complex Rotary Kiln

DEM investigation of the axial dispersion behavior of a binary mixture in the rotating drum

Three-dimensional axial dispersion dynamics of granular flow in the rolling-regime rotating drum

Simulation of Mixing Process for Size-Type Binary Wet Particulate Systems in A Rotating Horizontal Drum by Discrete Element Method

Numerical Study on Particle Mixing in a Double-Screw Conical Mixer

2D DEM Simulation of Particle Mixing in Rotating Drum: A Parametric Study

Numerical Simulation of Particle Mixing Behavior in High Speed Shear Mixer and Cylinder Mixer

Numerical Simulation of Tetrahedral Particle Mixing and Motion in Rotating Drums

An Experimentally Validated Coarse-Grain DEM Study of Monodisperse Granular Mixing

An Investigation of Heat Transfer of Flexible Fibers in a Rotating Drum Dryer Using the Discrete Element Method

Modelling of particle mixing and segregation in the transverse plane of a rotary kiln

Numerical Simulation and Analysis of Effect of Injection Volume on Biomass Particle Cyclone Venturi Dryer

Numerical and Experimental Study of Radial Segregation of Bi-Disperse Particles in a Quasi-Two-dimensional Horizontal Rotating Drum

DEM simulation and analysis of particle mixing and heat conduction in a rotating drum

Numerical investigation of the particle flow behaviors in a fluidized-bed drum by CFD-DEM

Numerical Study of Mixing of Binary-Sized Particles in Rotating Tumblers on the Effects of End-Walls and Size Ratios