Abstract:This paper presents the experimental investigation on the internal working process especially the internal leakage of a rotary vane expander prototype, which was developed to replace the throttling valve to improve the Coefficient of Performance (COP) of the transcritical CO2 refrigeration cycle. The pressure diagram as a function of the rotation angle (p–θ diagram) was recorded by two pressure sensors arranged within the expansion chamber, based on which the features of the working process were analyzed and effects of the some improvement measures on the internal leakage were discussed. Compared with the ideal p–θ diagram, the recorded diagrams presented more rapid decrease in the pressure during expansion process, which was attributed to serious leakage within the expander. Further analysis of the recorded p–θ diagrams showed that three adjacent vanes instead of two formed an integrated working chamber, which implied that the in-between vane did not contact the cylinder wall at all, and this guess was proved by the high speed video recording of the running rotor together with the vanes during operation of the expander in CO2 system. By arranging springs in the vane slots, tight contact between the vanes and the cylinder wall was ensured and hereby the working process was improved. The gap between the suction and discharge ports was another important leakage path and installation of a seal there could increase the pressure difference through the expander by 1.5–2.5MPa by decreasing the leakage directly from the high-pressure suction chamber to the low-pressure discharge chamber. Performance test of the modified expander prototype with springs in the slots and seal at the seal arc showed that the volumetric efficiency increased from 17% to 30% and the isentropic efficiency from 9% to 23% at the speed of 800rpm.

Experimental Research on Internal Working Process of Rotary Vane Expander in CO2 Refrigeration System

Experimental investigation on the internal working process of a CO2 rotary vane expander

Improved Rotary Vane Expander for Trans-Critical Co2 Cycle by Introducing High-Pressure Gas into the Vane Slots

Modeling and Experimental Investigation on the Internal Leakage in a CO2 Rotary Vane Expander

Study of A Rotary Vane Expander for the Transcritical Co2 Cycle-Part I: Experimental Investigation

Investigation on the Rotary Vane Expander by Introducing High Pressure into Vane Slots

DEVELEPMENT OF ROTARY VANE EXPANDER FOR CO2 TRANS-CRITICAL REFRIGERATION CYCLE

A study of the vane dynamics in a rotary vane expander for the transcritical CO<sub>2</sub> refrigeration cycle

Study of a Rotary Vane Expander for the Transcritical CO 2 Cycle—Part II: Theoretical Modeling

Development and Experimental Validation of Novel Free-Piston Expander

Study and development of an transcritical CO2 rotary vane expander

A Comparative Study on Regulation Methods for Transcritical CO2 Ejector Expansion Refrigeration System.

Development of a double acting free piston expander for power recovery in transcritical CO2 cycle

Comparison between modeling and experiments on a two-stage rotary vane expander for an HFC-410A air conditioning system

The new refrigeration system with vortex tube and ejector

Experimental Investigation on the Thermodynamic Performance of a Rotary Vane Expander in the Air System

Development of the Free Piston Expander for Work Recovery in Transcritical CO2 Refrigeration Cycle

Experiment on Two-Stage Rotary Vane Expander in HFC410A Air-Conditioning System

Theoretical Research on Dynamic Characteristic of Rotary Vane Expander

Simulation study on a novel vane-type expander with internal two-stage expansion process for R-410A refrigeration system

Theoretical Research on Rotary Vane Expander for Energy Recovery in Vapor Compression Refrigeration System