Abstract:The performance of air-source heat pump is strongly influenced by ambient temperature variation. Improving its stability and efficiency during wintertime is important for promoting its applications, while existing studies paid few attentions to flexible parameter regulation of heat pump using mixture. In this paper, a single-stage compound air-source heat pump using ternary mixture was theoretically simulated and experimentally tested, in which operating parameters including pressure and concentration could be regulated with the cooperation of multiple valves and reservoirs. Using CO2/R134a/R600, operating pressure and mixture concentration were successfully regulated at ambient temperature from -30 & DEG;C to 0 & DEG;C, achieving a coefficient of performance from 1.834 to 2.546 when producing hot water at 75 & DEG;C. Whether R134a inclusion was favorable to energy performance depended on its influence on the temperature matching in recuperative process, especially the heat transfer process in recuperator. The addition of R134a significantly alleviated the increase of operating pressure and thus enlarged the operation range of this heat pump. The flammability range of CO2/R134a/R600 was calculated, indicating the insignificant influence of R134a on flammability retardance in the studied range of this paper. The significance of this study is further revealed with the potential advances of heat transfer technique and new-generation refrigerant. The findings in this paper contribute to: 1) the modification of air-source heat pump for operation at low temperature; 2) the regulation method for mixed-refrigerant system; 3) the exploration of new mixed-refrigerant in thermodynamic cycle.

Experiment on Two-Stage Rotary Vane Expander in HFC410A Air-Conditioning System

Theoretical investigation on an ejector–expansion refrigeration cycle using zeotropic mixture R290/R600a for applications in domestic refrigerator/freezers

The new refrigeration system with vortex tube and ejector

A novel absorption refrigeration cycle

Theoretical Study on A Novel R32 Refrigeration Cycle with A Two-Stage Suction Ejector

Performance Analysis of a Novel Hybrid Vapor Injection Cycle with Subcooler and Flash Tank for Air-Source Heat Pumps

A Theoretical Study of an Innovative Ejector Enhanced Vapor Compression Heat Pump Cycle for Water Heating Application

Theoretical Analyses of a New Two-Stage Absorption-Transcritical Hybrid Refrigeration System

Comparative Studies of Ejector-Expansion Vapor Compression Refrigeration Cycles for Applications in Domestic Refrigerator-Freezers

Two-evaporator refrigeration system integrated with expander-compressor booster

Experimental study on refrigerant maldistribution in a fin-and-tube evaporator for a direct expansion air-conditioning system

Experimental Investigations on the Performance of a Single-Stage Compound Air-Source Heat Pump Using CO2/R600a in Cold Regions

Comprehensive Performance Evaluation on a Transcritical Co2 Ejector-Expansion Heat Pump System

Experimental and Theoretical Assessments on the Systematic Performance of a Single-Stage Air-Source Heat Pump Using Ternary Mixture in Cold Regions

Experimental Study on New Variable Composition Heat Pump System

Some Design Features of Co2 Swing Piston Expander

Modulating Technology for Scroll Compressor with Refrigerant Release

Performance Investigation of CO 2 Automotive Air-conditioning System with Ejector at 45°C Ambient Temperature

Comprehensive Experimental Study on a Transcritical CO 2 Ejector-Expansion Refrigeration System

Performance Investigation of CO2 Automotive Air-conditioning System with Ejector at 45°C Ambient Temperature

Cooling performance enhancement for the automobile transcritical CO2 air conditioning system with various internal heat exchanger effectiveness