Abstract:In small- to medium- scale buildings such as residences and retails located in hot and humid regions, direct expansion based air conditioning systems are widely used for the control of indoor thermal environment. However, to simultaneously control indoor air temperature and humidity using direct expansion air conditioning systems, additional and costly provisions/installation spaces are usually required. Therefore, to address the inadequacies encountered in previous related studies, based on multi-evaporator technology, a novel direct expansion based air conditioning system having a two-sectioned evaporator or cooling coil (TS-DXAC) was proposed to provide variable dehumidification capacity and improved indoor air distribution. In this paper, the development of a steady-state physics-based mathematical model for the novel TS-DXAC system is presented. The model was developed by referring to the existing sub-models for the key system components, such as a compressor, a condenser and an evaporator, which were currently available in open literature. The developed model was experimentally validated using a purposely established prototype experimental TS-DXAC system, with the differences between experimental and predicted results of less than 6%. Using the validated TS-DXAC model, a follow-up modeling study was carried out on optimizing the sizes of the two sections. The simulation results suggested that a lower surface area ratio for the two sections (Rs) can lead to a larger variation ranges of both output total cooling load (TCC) and equipment sensible heat ratio (E SHR). For example, at the inlet state of 26 °C and 50% relative humidity, when Rs was altered from 1:1 to 1:3, the variation range for TCC was increased by 33%, and that for E SHR by 51%, which was beneficial to better dehumidification.

Simulation study on a novel vane-type expander with internal two-stage expansion process for R-410A refrigeration system

Theoretical Study on A Novel R32 Refrigeration Cycle with A Two-Stage Suction Ejector

Theoretical investigation on an ejector–expansion refrigeration cycle using zeotropic mixture R290/R600a for applications in domestic refrigerator/freezers

Comparative Studies of Ejector-Expansion Vapor Compression Refrigeration Cycles for Applications in Domestic Refrigerator-Freezers

A novel absorption refrigeration cycle

The new refrigeration system with vortex tube and ejector

Performance evaluation on an internal auto-cascade refrigeration cycle with mixture refrigerant R290/R600a

Performance Analysis of a Modified Zeotropic Mixture (R290/R600) Refrigeration Cycle with Internal Subcooler for Freezer Applications

Performance Evaluation of a Modified Refrigeration Cycle with Parallel Compression for Refrigerator-Freezer Applications

Theoretical Investigation on the Performance of a Modified Refrigeration Cycle Using Binary Zeotropic Hydrocarbon Mixture R170/R290

Theoretical Analyses of a New Two-Stage Absorption-Transcritical Hybrid Refrigeration System

Numerical investigations on the performance of a single-stage auto-cascade refrigerator operating with two vapor-liquid separators and environmentally benign binary refrigerants

A Comparative Study on Regulation Methods for Transcritical CO2 Ejector Expansion Refrigeration System.

Theoretical Analysis of a Double Ejector-Expansion Autocascade Refrigeration Cycle Using Hydrocarbon Mixture R290/R170

Performance Analysis of an Advanced Ejector-Expansion Autocascade Refrigeration Cycle

Two-evaporator refrigeration system integrated with expander-compressor booster

Experimental study on refrigerant maldistribution in a fin-and-tube evaporator for a direct expansion air-conditioning system

Performance Evaluation of Novel Double Internal Auto-Cascade Two-Stage Compression System Using Refrigerant Mixtures

Theoretical Analysis on a Novel Two-Stage Compression Transcritical CO2 Dual-Evaporator Refrigeration Cycle with an Ejector

Modulating Technology for Scroll Compressor with Refrigerant Release

A modeling study on a direct expansion based air conditioner having a two-sectioned cooling coil