Abstract:In order to achieve desired mechanical properties of alloys by manipulating grain boundaries (GBs) via solute decoration, it is of great significance to understand the underlying mechanisms of microstructural evolution and plastic deformation. In this work, nanocrystalline (NC) Cu-W alloyed films with W concentrations spanning from 0 to 40 at% were prepared by using magnetron sputtering. Thermal stability (within the temperature range of 200 °C-600 °C) and hardness of the films were investigated by using the x-ray diffraction, transmission electron microscope (TEM) and nanoindentation, respectively. The NC pure Cu film exhibited substantial grain growth upon all annealing temperatures. The Cu-W alloyed films, however, displayed distinct microstructural evolution that depended not only on the W concentration but also on the annealing temperature. At a low temperature of 200 °C, all the Cu-W alloyed films were highly stable, with unconspicuous change in grain sizes. At high temperatures of 400 °C and 600 °C, the microstructural evolution was greatly controlled by the W concentrations. The Cu-W films with low W concentration manifested abnormal grain growth (AGG), while the ones with high W concentrations showed phase separation. TEM observations unveiled that the AGG in the Cu-W alloyed thin films was rationalized by GB migration. Nanoindentation results showed that, although the hardness of both the as-deposited and annealed Cu-W alloyed thin films monotonically increased with W concentrations, a transition from annealing hardening to annealing softening was interestingly observed at the critical W addition of ∼25 at%. It was further revealed that an enhanced GB segregation associated with detwinning was responsible for the annealing hardening, while a reduced solid solution hardening for the annealing softening.

Heat-treated Microstructure of Co-Al-W Ternary Alloys

The W alloying effect on thermal stability and hardening of nanostructured Cu-W alloyed thin films

The microstructural characteristics and high temperature mechanical properties of quaternary Ti–V–Al–Co shape memory alloys

Effect of Co Addition on Solidification Velocity, Hardness and Refined Structure Transformation Mechanisms of Undercooled Ni-Cu-Co Alloys

Crystallization behavior of ternary γ–γ′ Co–Al–W alloy

Study on Precipitation in (cocrfemnni)90al6ti4 High Entropy Alloy

Microstructural stability and tensile properties of a Ti-containing single-crystal Co–Ni–Al–W-base alloy

Effects of Alloying Elements on the Microstructure of Precipitation Strengthened Co-based Superalloys

Microstructures and Mechanical Properties of a L12-structured Precipitation Strengthened Co-based Superalloy

Experimental Investigation on Isothermal Sections at 1273 and 1473 K in the Co–Ti–W System

Microstructure Evolution of Ti–46Al–6Nb–（Si,B） Alloys During Heat Treatment with W Addition

Effects of Co on Microstructure Evolution of a 4th Generation Nickel-Based Single Crystal Superalloys

Precipitation kinetics and morphology evolution of the Co3(Al, W) phase in a medium supersaturation Co–Al–W alloy

High-throughput exploration of alloying effects on the microstructural stability and properties of multi-component CoNi-base superalloys

Effect of Ta additions on microstructure and mechanical properties of a single-crystal Co–Al–W-base alloy

Effect of Heat Treatment on the Microstructure of Multiphase Nial-Based Alloy

Effects of Cobalt on Solidification Characteristics and As-Cast Microstructure of an Advanced Nickel-Based Single Crystal Superalloys

Effects of Al content on microstructures and high-temperature tensile properties of two newly designed CoNi-base superalloys

The Temperature Dependence of High-Temperature Strength and Deformation Mechanism in a Single Crystal CoNi-base Superalloy

Effects of Ti and Cu on the Microstructure Evolution of AlCoCrFeNi High-Entropy Alloy During Heat Treatment

Microstructural Evolution and Mechanical Properties of a Ni-Based Superalloy, TMW-4