Abstract:The gas spark switch, because of simple structure, wide working voltage range and huge charge quantity conversion, is widely applied to nuclear physics, electron beam accelerators, etc. However, the stability of the breakdown voltages could deteriorate due to repetitive discharging, which degrades the performance of the switch significantly. The objective of this paper is to experimentally study the influence of gas-insulating media properties and electrode surface morphologies on the breakdown stabilities. Nitrogen at pressure of 10 bar was chosen as the working gas. The experiments were conducted based on the laser scattering and laser shadow photography to detect particle generation during discharging and gas recovery after discharging. After that, Scanning Electron Microscope (SEM) technology was employed to observe the microscopic geometry. The results show the electrodes were damaged by honeycomb-like cavities, cracks and erosion protuberance, which is the consequence of particles emitting or hitting. In addition, the gas flow field was disturbed tempestuously following the current extinction and the recovery period may take tens of microseconds. When the switch worked with high repetition rates, its breakdown voltage could be reduced due to the residual flow disturbance of previous discharges. A great number of particles were generated during per pulse discharge and they could accumulate gradually to fill up the whole gap, which transform the insulating media from pure gas to mixture with abundant solid particles. All factors above may cause abnormal breakdown thus affects the stability of the gas spark switch.

Self-breakdown Properties and Optimization of Insulator Envelope for MV Gas Switch under Pulsed Voltage

Self Breakdown Properties and Optimum of Insulator Envelope for MV Gas Switches

Analysis and Enhancing of Self-Breakdown Voltages of A Multistage Gas Switch

Experimental Study on Circuit Parameters and Breakdown Properties of Water Switch under Pulsed Voltage

Analysis of the characteristics of gas insulated, multiple-stage, high voltage switches

Breakdown characteristics of a multi-gap gas switch with corona discharge for voltage balance

Investigation On The Characteristics Of Self-Breakdown In Fltd Gas Spark Switches

Study on Breakdown Stability of Gas Spark Switches

Experimental Study of Electrode Erosion and Aging Process of a Specially Designed Gas Switch under Repetitive Arc Discharge

Optimization of Self-Breakdown and Triggering Characteristics on Multigap Gas Switch by Mounting Resistors and Capacitors in Parallel with Switch Gaps

Combined Effects of Electrical and Mechanical Stresses on Insulation Breakdown—Part II: Bursting Breakdown of GIL Insulator

Calculation Model of Self-Breakdown Voltage Distribution in Gas Switches

Study of operation mode and breakdown characteristics for multi-stage gas switch

Breakdown properties on gas rail gap switch with operating voltage of ±100kV

Characteristics Study of Multigaps Gas Switch With Corona Discharge for Voltage Balance

Behaviors and Mechanism of Electrical Breakdown in Short Vacuum Gaps under Pulsed DC Voltage

Optimization Design of Bushing of Distribution Switchgear Equipment

Preliminary Research on Breakdown Mechanism of Gas Switch

Investigation on Breakdown Characteristics of a Pulsed Gas Switch and Influence of Pre-Ionization

A New Multichannel Gas Spark Switch Base on Surface Flashover Technology