Abstract:Magnesium (Mg) and its alloys are one of the highly sought after structural material due to its lowest density among the structural material. Various attempts are being made by researchers to improve the mechanical performance of Mg alloys to widen their scope of application domains, especially in defence and biomedical sectors. On the development of Mg matrix composites, various works are reported on adding ceramic-based reinforcement which is proven to improve the strength of the material, but at the cost of ductility. With the research attempt on developing metallic reinforcement-based Mg composites being scarce, the scope of developing such composite material with superior strength and ductility is huge. Nickel has zero-solubility in Mg, high melting point and few closely matching lattice spacing with Mg crystal, which enabled simultaneous crystallization of Mg, with Ni acting as nucleation sites, and helped refining the microstructure. In the present research work, an attempt is made to incorporate 5 Wt.% of sub-micron-Ni particulate as reinforcement in developing an AZ31 matrix composite through stir casting route. A field emission scanning electron microscope and optical microscope was used to give the detailed analysis on the microstructural evaluation of the cast AZ31 alloy and the developed composite. Elemental mapping was done to confirm the uniform distribution of Ni particles throughout the magnesium matrix. The influence of reinforcement on the mechanical properties of the composites were investigated. The composite displayed improved properties when compared to the base alloy in terms of hardness, yield strength and ultimate tensile strength. The hardness of the composite was found to be 68.4HV, whereas the base alloy had a hardness of 53HV. The ultimate tensile strength (UTS) for the AZ31/Ni composite was greater than 50% when compared with the base alloy. Fractography study revealed the type of fracture of the base alloy and the composite.

Research of Mechanical Properties of a Micro/nano Rod Material Based on the Shape of Nocadia

Investigation of fatigue mechanical properties of apolycrystalline solid at mesoscopic scale using depth-sensing indentation (DSI) technique

Mechanical Properties of Micro-phases Along < 001 > Direction of Directionally Solidified Nickel-base Super-alloy by In-situ Nano-Indentation

Development of AZ91D Magnesium Alloy-Graphene Nanoplatelets Composites Using Thixomolding Process

The Effects of Morphology and Temperature on the Tensile Characteristics of Carbon Nitride Nanothreads.

Microstructure and mechanical behaviors of Co-Ni Magneto - shape - memory alloys

Role of Nickel Particulate Reinforcement on Microstructure and Mechanical Performance of AZ31 Magnesium Composite

Probing nanomechanical properties of nickel coated bacteria by nanoindentation

Effect of Metallic Content on Mechanical Property of Ni/(10NiO-NiFe2O4) Cermets

Influence of Structural Porosity and Martensite Evolution on Mechanical Characteristics of Nitinol via In-Silico Finite Element Approach

Microstructure Effects on Mechanical Properties of FeNiCrCoCu Nanoporous High-Entropy Alloy with Bicontinuous Characteristics

Preparation, Magnetic and Mechanical Properties of Fe/Ni-Based Amorphous Fibers

Nanohardness by Nanoindentation

High Strain Rate Compressive Deformation Behavior of Nickel Microparticles

Edge Dislocation and Grain Boundaries Effects on the Mechanical Properties in Nicoal Medium Entropy Alloy

Nanomechanical and bending properties of nickel-titanium orthodontics archwires by depth-sensing indentation

Magnetic Field Tunable Small-scale Mechanical Properties of Nickel Single Crystals Measured by Nanoindentation Technique

Microstructural/compositional regulations and actuation properties of nanoporous ternary CuMnNi alloys fabricated by electrochemical dealloying

Numerical investigation of mechanical properties of aluminum-copper alloys at nanoscale

Correlation between microstructural inhomogeneity and architectural design in additively manufactured NiTi shape memory alloys

Influence of an Engineered Notch on the Electromagnetic Radiation Performance of NiTi Shape Memory Alloy