Abstract:Nano-porous metals exhibit novel physical and chemical properties, showing a promising potential for scientific research and engineering applications such as catalyst, electrochemical catalysis, detecting and sensing etc. The nano-porous materials are normally made of noble metal films by chemical dealloying about several-hundred micrometers in thickness prepared by arc melting, magnetic spattering and electrodeposit, which limits their performance and potential applications. We report a novel approach to fabricate Cu-Mn nano-porous structures on any location of conventional metallic components by laser deposition hybrid with electrolyte dealloying. Cu-Mn alloy layers with specific composition were deposited by laser onto a mild steel substrate surface. The laser deposition parameters were optimized to achieve sound Cu-Mn layers free of cracks, pores or inclusion. The deposition dilution was specifically controlled to avoid the designed composition of the Cu-Mn alloy to be modified by the melted Fe from the substrate and thus to obtain a single solid-solution microstructure, as a first precondition for forming nano-porous structure by electrolyte dealloyibng. Laser deposition offers a flexible approach to deposit designed composition with designed microstructure and geometry onto any location. The microstructure of the as-deposited layer was further processed by laser remelting for grain-size refinement to meet the second precondition. The second-dendrite-arm-spacing (SDAS) of the as-deposited structure decreases with the increase of laser remelting speed. SDAS can be decreased to 1.6μm with a laser remelting speed up to 83mm/s. Electrolyte dealloying was applied on the as-deposited and remelted layer. The polarization curves of Cu-Mn alloy were analyzed in KNO3 and HCl electrolytes to figure out their electrochemical behavior. The Cu-Mn alloy shows selective dissolution characteristics in different electrolytes. Nanoporous Cu and nanoporous Mn structures can be formed with optimal electrochemically dealloying parameters in 0.1M HCl and 0.1M KNO3 electrolytes respectively. The nano porous structure is tunable by the laser parameters and the chemical etching conditions. Nanoporous Cu structure with pore size ranging from 30 to 50nm was achieved. The nano-Mn structure displays a ribbon-like morphology with ultrahigh roughness factor up to 900. Both Cu and Mn nanostructures exhibit good performance on Surface Enhanced Raman Scattering (SERS) and superhydrophobicity. We further used laser texturing to obtain a regular micro-structure on the laser deposited CuMn surface followed by selective chemical etching to obtain a random nanoporous structure on regular microstructure-a micro/nano hierarchical structure. The regular micro-scale roughness can be tuned from 5 μm to 30 μm Rz by laser texturing while the ligament width and spacing of the random nano porosity be 10-50 nm by selective chemical etching. This unique hierarchical structure demonstrates good photocatalytic performance.

Microstructural/compositional regulations and actuation properties of nanoporous ternary CuMnNi alloys fabricated by electrochemical dealloying

High-performance, low-cost nanoporous alloy actuators by one-step dealloying of Al-Ni-Cu precursors

The Electrochemical Actuation Performances of Nanoporous Ternary AlCoCu Alloy with a Unique Nanosheet Structure

Electrochemical actuation behaviors of bulk nanoporous copper with a hierarchical structure

Potentiostatic Dealloying Fabrication and Electrochemical Actuation Performance of Bulk Nanoporous Palladium

Reforming Nanostructured CuAg Alloy to Improve Ductility and Electrical Conductivity

Nanoporous copper as an inexpensive electrochemical actuator responsive to sub-volt voltages

Hierarchically Nanoporous Nickel-Based Actuators With Giant Reversible Strain And Ultrahigh Work Density

Dual-phase Nanostructuring As a Route to Flexible Nanoporous Metals with Outstanding Comprehensive Mechanical Properties

Mechanical behaviors of novel multiple principal elements CuAl10Fe5Ni5Mn1.2 wt% with micro-nano structures

Microstructure and properties of a novel ultra-high strength, high elasticity and high plasticity Cu–20Ni–20Mn-0.3Nb-0.3Cr-0.1Zr alloy

Alloying/dealloying mechanisms, microstructural modulation and mechanical properties of nanoporous silver via a liquid metal-assisted alloying/dealloying strategy

Controlled Dealloying of Alloy Nanoparticles Toward Optimization of Electrocatalysis on Spongy Metallic Nanoframes.

Fabrication of Cu-Ni Alloy Microcomponents using Localized Electrochemical Deposition

Fabrication of Nanoporous Metal by Selective Electrochemical Dealloying from Laser Cladding Cu-Mn Alloys

Fabrication and Characterization of Magnetic Nanoporous Cu/(Fe,Cu)3O4 Composites with Excellent Electrical Conductivity by One-Step Dealloying

Formation and characterization of Monolithic nanoporous copper by chemical dealloying of Al-Cu alloys

Tunable Nanoporous Metallic Structures Formed by Hybrid Laser Deposition and Chemical Etching and Their Functionalization

The mechanical and functional behaviors of Mn–15 wt.%Cu alloy produced by selective laser melting

Hierarchical Carbon Nanotube‐Supported Conductive Metal–Organic Framework Nanosheet Toward High‐Strain Ionic Soft Actuator

Achieving Optimum Mechanical Performance in Metallic Nanolayered Cu/X (X = Zr, Cr) Micropillars