Abstract:Partial admission is applied wildly to regulate the power in turbomachinery. The prominent unsteady characteristic has a great effect on the aerodynamic performance and unit safety. The RNG k-ε turbulence model, dual time step method, sliding interface model and structural hexahedron mesh were adopted and the 3-D unsteady viscous model for the full annulus of the control stage of 300MW steam turbine with admission room and reinforced rib was constructed. The flow phenomena and exciting force were investigated detailed in multiple working conditions. The time-averaged unsteady wheel efficiency is over 3% lower than that from steady analysis with two different degrees of admission. The rotor blades experience large unsteady axial and tangential forces while passing the blocked channel. Spectrum analysis was performed and 50.0Hz is seen as the typical low frequencies. The largest amplitude of unsteady forces under the condition of three valves opened (ξ = 0.70) is at the first multiple rotational frequency due to the circumferential nonuniformities of flow domain, while the largest amplitude under the condition of two valves opened (ξ = 0.47) is at the second multiple rotational frequency due to the circumferential periodicities of flow domain. These provide essential parameters for strength and vibration analysis of blade. The pressure and static entropy plots show that the circumferential distributions are nonuniform and the nonuniformities decrease while moving towards the downstream sections in the two conditions. The entropy is significantly large, which means that the mixing and windage losses are huge resulting in the decrease of the blade power. The pressure drop moves towards the downsteam blade surface while rotor passing into the blocked channel. The pressure is recovering while rotor passing out the blocked channel.

Investigation of Three Dimensional Viscous Unsteady Flow and Excitation Force of Turbomachinery Stage

Investigations of Multi-Stage Turbomachinery Flow Based on Mixing Plane Models and Unsteady Simulations

Numerical Investigation on Unsteady Flowfield of Turbine Stage

Numerical Simulation of Unsteady Flow Phenomena and Excitation Force in Control Stage of Steam Turbine

Numerical Study On Three Dimensional Unsteady Flow Of A High Pressure Gas Turbine Stage

Study on Effects of Blade Geometric Scale on the Unsteady Turbomachinery Flows

Study On Unsteady Aerodynamic Force Of Turbine Blade With Different Mass Flow

Numerical Investigations on Unsteady Flow Excitation of Long Blade Turbine Stage

Investigations on Unsteady Flow Excitation and Mechanical Performance of Last Turbine Stage Long Blade Using Fluid-Structure Interaction Method

Numerical Simulation of Unsteady Flow Phenomena and Exciting Force in Control Stage of Steam Turbine under Multiple Working Conditions

Computational Fluid Dynamics Modeling Three-Dimensional Unsteady Turbulent Flow and Excitation Force in Partial Admission Air Turbine

VISCOUS THREE-DIMENSIONAL FLOW SOLVERS USED IN MULTISTAGE TURBINE

NUMERICAL STUDY OF THE 3-D UNSTEADY FLOW IN TURBOMACHINERY STAGES

Numerical Investigation into the Mechanism Regarding the Inception and Evolution of Flow Unsteadiness Induced by the Tip Leakage Flow in a Transonic Compressor

Numerical Investigation on the Unsteady Flowfield of the Turbine Stage under Different Axial Gaps

Numerical Investigations into the Origin of Tip Unsteadiness in a Transonic Compressor

Numerical Investigation of Unsteady Flow and Alternating Stress of a Three-Stage Centrifugal Compressor

Numerical Simulation of the 3-D Unsteady Flow in the Steam Turbine Last Stage

Numerical Investigation of Unsteady Flow Interactions in a Transonic Single Stage High Pressure Turbine

Experimental Investigation of Flow Characteristic of Tip Leakage Flow in an Axial Flow Compressor Rotor

THREE DIMENSIONAL VISCOUS FLOW NUMERICAL ANALYSIS OF STALL FLUTTER IN STEAM TURBINE BLADES