Abstract:In this paper, a second-order, dual-band, band-pass frequency selective surface (FSS) with high selectivity is presented by cascading three-layers of periodic metallic arrays. The unit cell in both two exterior layers is composed of gridded-double square loops (G-DSLs) while the element in the middle layer is consisting of wire grid. The three layers are separated by two thin F4B-2 substrates with dielectric constant of 2.65 + 0.02i. The proposed FSS can provide multi-transmission poles and multi-transmission zeros. There are two transmission poles in each pass-band. The two pass-bands are separated by two transmission zeros. On the upper side of the second pass-band, other two transmission zeros are generated also. These transmission zeros lead to a wide out of band rejection and a fast fall off response on both sides of each pass-band. The simulation is implemented using full wave electromagnetic simulator CST Microwave Studio, the central frequencies of the two pass-bands are 12.7 and 17.4 GHz. In addition, the designed principle is described using equivalent circuit model (ECM). Furthermore, the prototype of the FSS is fabricated and measured. Both simulated and measured results demonstrated that the proposed FSS has the merits of incident angle stability from 0° to 60° for both TE and TM polarizations.

Analysis of frequency selective surface and multiplexer at millimeter wave/ sub-millimeter wavelengths

A Novel Dual-Band Frequency Selective Surface (FSS)

FDTD analysis of millimeter wave FSS

A Novel Miniaturized Dual-band Frequency Selective Surface

Bandpass Frequency Selective Surface with Two Sharp Sidebands Based on Shunted Quarter‐mode Substrate Integrated Waveguide Cavities

A Novel Frequency Selective Surface with Smaller Size and Wide Band

Miniaturized Frequency Selective Surface and Broadband Frequency Selective Surface Design

High Performance Frequency Selective Surface Using Cascading Substrate Integrated Waveguide Cavities

Design and Analysis of Reconfigurable Frequency Selective Surfaces using FDTD

Effective Analytical Method of Frequency Selective Surface with Arbitrary Element

A Miniaturized Dual-Band Frequency Selective Surface (FSS) with Closed Loop and Its Complementary Pattern

Analysis of a Novel Frequency Selective Surface

A Modified High-Selective Frequency Selective Surface Designed by Multilevel Green's Function Interpolation Method

A Modified High-Selective Frequency Selective Surface Designed by Multilevel Green’s Function Interpolation Method

Analysis of a Novel Metal Frequency Selective Surface of Millimeter Wave Comparator

Design and Analysis of a Tri-Band Frequency Selective Surface with a Second-Order Response

Dual-Band High Selective Frequency Selective Surface Design and Analysis

Analyzing Periodic Arrays With The Mutual Admittance And Spectral Approaches

Frequency-selective Surfaces with Two Sharp Sidebands Realised by Cascading and Shunting Substrate Integrated Waveguide Cavities

A Compact Second-Order Frequency Selective Surface With Broadband Response

A NOVEL DUALBAND FREQUENCY SELECTIVE SURFACE WITH PERIODIC CELL PERTURBATION