Abstract:In this paper, a second-order, dual-band, band-pass frequency selective surface (FSS) with high selectivity is presented by cascading three-layers of periodic metallic arrays. The unit cell in both two exterior layers is composed of gridded-double square loops (G-DSLs) while the element in the middle layer is consisting of wire grid. The three layers are separated by two thin F4B-2 substrates with dielectric constant of 2.65 + 0.02i. The proposed FSS can provide multi-transmission poles and multi-transmission zeros. There are two transmission poles in each pass-band. The two pass-bands are separated by two transmission zeros. On the upper side of the second pass-band, other two transmission zeros are generated also. These transmission zeros lead to a wide out of band rejection and a fast fall off response on both sides of each pass-band. The simulation is implemented using full wave electromagnetic simulator CST Microwave Studio, the central frequencies of the two pass-bands are 12.7 and 17.4 GHz. In addition, the designed principle is described using equivalent circuit model (ECM). Furthermore, the prototype of the FSS is fabricated and measured. Both simulated and measured results demonstrated that the proposed FSS has the merits of incident angle stability from 0° to 60° for both TE and TM polarizations.

Frequency-selective Surfaces with Two Sharp Sidebands Realised by Cascading and Shunting Substrate Integrated Waveguide Cavities

Bandpass Frequency Selective Surface with Two Sharp Sidebands Based on Shunted Quarter‐mode Substrate Integrated Waveguide Cavities

A Novel Dual-Band Frequency Selective Surface (FSS)

A Bandpass Frequency Selective Surface With a Low Cross-Polarization Based on Cavities With a Hybrid Boundary

Dual-band Frequency Selective Surface with Quasi-Elliptic Bandpass Response

Four-band Frequency Selective Surface Based on Quarter-Mode Substrate Integrated Waveguide Technology

A Novel Frequency Selective Surface with Smaller Size and Wide Band

Wide‐angle Band‐pass FSS with High‐frequency Selectivity Based on SIW Cavity Technology

Filtenna-Filtenna Design for Broadband and High-Selectivity Frequency Selective Surface

Narrowband Frequency Selective Surface Based on Substrate Integrated Waveguide Technology

A Multi-functional Frequency Selective Polarization Converter Based on Substrate Integrated Waveguide Cavities

Wideband and Wide-Angle FSS Based on Quarter-Mode Substrate Integrated Waveguide Technology

A Novel Angularly Stable Wide Passband Frequency Selective Surface

Dual-Band High Selective Frequency Selective Surface Design and Analysis

A Quad-Band Highly Selective Frequency Selective Surface with Ultra-Wideband Rejection

Frequency Selective Surface with Miniaturized Elements Based on Quarter-Mode Substrate Integrated Waveguide Cavity with Two Poles

A Miniaturized Dual-Band Frequency Selective Surface (FSS) with Closed Loop and Its Complementary Pattern

Wideband and Wide-Angle FSS Using Loop Slotted Hybrid Quarter-Mode Substrate Integrated Cavity With Two Independently Controllable Poles

Fabrication of Dual-Passband Frequency Selective Surface Utilizing Complementary Structure

A Novel Fss Based on Hybrid Boundary Condition Cavity

A Quad-Band Frequency Selective Surface with Highly Selective Characteristics