Abstract:A linearly polarized reconfigurable 3-D frequency-selective surface (FSS) with controllable resonant behavior is proposed in this article. The reconfigurable performance relies on a kirigami-inspired deployable structure composed of crisscross substrates with mutually inverted notches. Four identical asymmetric double-split ring resonators are, respectively, positioned on the four faces of the 3-D unit cell with a parallelogram cross section. Under the normal incidence, two resonant frequencies can be seen in the transmission coefficient. At each resonant frequency, there exist two different reconfiguration mechanisms that have inverse impacts on the shift direction of the resonant frequency in the process of deploying. The type and the dominance degree of the reconfiguration mechanism that has the dominant impact can be adjusted by changing the position of the splits, which implies controllability of the shift speed and direction of the resonant frequencies when the deploying angle changes. Finally, a reconfigurable FSS with stable center frequency is proposed through the two resonant frequencies being engineered to shift at a similar speed but in opposite directions with the deploying angle. The simulation results illustrate that the proposed FSS can achieve a continuously reconfigurable bandwidth in the range of 4.8% and 30.3% and a center frequency variation of less than 2.0%, while the same level of center frequency stability is also verified by measurement results.

Design and Analysis of Reconfigurable Frequency Selective Surfaces using FDTD

DESIGN OF NOVEL RECONFIGURABLE FREQUENCY SELECTIVE SURFACES WITH TWO CONTROL TECHNIQUES

A Novel Dual-Band Frequency Selective Surface (FSS)

Research Progress and Application Prospects of Active Frequency Selective Surfaces

Design, analysis, and reconfiguration of a multi-arm spiral frequency selective surface

Filtenna-Filtenna Design for Broadband and High-Selectivity Frequency Selective Surface

A Novel Miniaturized Dual-band Frequency Selective Surface

A PHYSICS-BASED HIE-FDTD METHOD FOR ELECTROMAGNETIC MODELING OF MULTI-BAND FREQUENCY SELECTIVE SURFACE (INVITED)

A Novel Frequency Selective Surface with Smaller Size and Wide Band

A Novel Angularly Stable Wide Passband Frequency Selective Surface

A Physical Insight Into Reconfigurable Frequency Selective Surface Using Characteristic Mode Analysis

Switchable Frequency Selective Surfaces Absorber/reflector for Wideband Applications

Dual-Band Frequency Selective Surfaces With Planar-Dipole-Pair Elements

A Bandpass Frequency Selective Surface With a Low Cross-Polarization Based on Cavities With a Hybrid Boundary

FDTD Full Wave Simulations of Reconfigurable Intelligent Surfaces

FDTD Analysis of Periodic Structures with Arbitrary Skewed Grid

FDTD Analysis of Periodic Structures at Arbitrary Incidence Angles: A Simple and Efficient Implementation of the Periodic Boundary Conditions

A simple and efficient FDTD/PBC algorithm for scattering analysis of periodic structures

Design and analysis of a complementary structure-based high selectivity tri-band frequency selective surface

A Modified High-Selective Frequency Selective Surface Designed by Multilevel Green's Function Interpolation Method

Kirigami-Inspired Linearly Polarized Reconfigurable 3-D Frequency-Selective Surface With Controllable Resonant Behavior