Abstract:Polyacrylonitrile (PAN) has been investigated as an effective binder and coating material for silicon anodes in lithium ion batteries due to its inherent elasticity and the propensity to form conjugated structures. However, achieving a balance among the conductivity, binding strength and elasticity is a challenge faced by researchers. Herein, the structural and property evolution of PAN during calcination is systematically investigated to realize balanced conductivity and elasticity. Additionally, a hydrogen bonding network is established to address the issue of low binding strength by applying carboxymethyl cellulose (CMC) as the thickening agent for PAN. The as-prepared Si@cPAN@CMC electrode demonstrated a discharge capacity of 2358 mA h g-1 after 100 cycles at 1 A g-1, with an initial coulombic efficiency (ICE) of 91.0% and a capacity retention of 93.8%. Furthermore, the electrode exhibited a stable cycling life of nearly 700 cycles under a limited charge and discharge capacity of 1000 mA h g-1 at 1 A g-1, and the electrode with a mass loading of 3.0 mg cm-2 demonstrated a high areal capacity of 5.0 mA h cm-2 after 50 cycles at 0.5 A g-1. Therefore, this work opens a new avenue for designing a multifunctional coating layer for promising anodes of lithium-ion batteries. A coating with balanced conductivity, elasticity and binding strength is realized by establishing a hydrogen bonding network among SiNPs, modified-polyacrylonitrile (PAN), and binders, which can withstand a significant volume change.

Synthesis of Si-SnSb/pyrolytic polyacrylonitrile composite anode for reversible lithium storage

A Si–SnSb/pyrolytic PAN composite anode for lithium-ion batteries

Synthesis of PAN/SnCl 2 composite as Li-ion battery anode material

Effect of Pyrolytic Polyacrylonitrile on Electrochemical Performance of Si/graphite Composite Anode for Lithium-Ion Batteries

Synthesis of nano Sb-encapsulated pyrolytic polyacrylonitrile composite for anode material in lithium secondary batteries

Modified Polyacrylonitrile Cross-Linked with Carboxymethyl Cellulose Constructing a Hydrogen Bonding Network for High-Performance Silicon Anodes

Oxidative Pyrolysis of Si/Polyacrylonitrile Composites As an Unconventional Approach to Fabricate High Performance Lithium Ion Battery Negative Electrodes

High Molecular Weight Polyacrylonitrile Precursor for S@pPAN Composite Cathode Materials with High Specific Capacity for Rechargeable Lithium Batteries.

Synthesis of Spherical Nano Tin Encapsulated Pyrolytic Polyacrylonitrile Composite Anode Material for Li-Ion Batteries

Silicon/Graphite/Polyaniline Nanocomposite With Improved Lithium-Storage Capacity And Cyclability As Anode Materials For Lithium-Ion Batteries

Polyacrylonitrile/graphene composite as a precursor to a sulfur-based cathode material for high-rate rechargeable Li-S batteries

Conformal Conversion of Polyphosphazene@Sb2MoO6 Nanowires to N/S-Doped/Carbon-Coated SbPO4/MoOx for High-performance Lithium Storage

Synthesis of nanosized Si composite anode material for Li-ion batteries

Polyacrylonitrile and Aluminum Metal Dual functionalization Interconnected Network for Superior Lithium Storage in Silicon Anode

Sulfurized Polyacrylonitrile Cathode Derived From Intermolecular Cross-Linked Polyacrylonitrile For A Rechargeable Lithium Battery

Sulfur Composite Cathode Materials for Rechargeable Lithium Batteries

A New Process of Preparing Composite Microstructure Anode for Lithium Ion Batteries

Nano-silicon/polyaniline composite for lithium storage

Polyaniline-Coated S/Super-P Composites As Cathode Materials for High Performance Lithium-Sulfur Batteries

S0.87Se0.13/CPAN Composites As High Capacity and Stable Cycling Performance Cathode for Lithium Sulfur Battery

Analysis of Structure and Electrochemistry of Selenium-Containing Conductive Polymer Materials for Rechargeable Lithium Batteries