Abstract:A novel composite anode material consisted of electrodeposited Sn dispersing in a conductive micro-porous carbon membrane, which was directly coated on Cu current collector, was investigated. The composite material was prepared by: (1) casting a polyacrylonitrile (PAN)/dimethylformamide (DMF) solution that contained silica particles on a copper foil, (2) removing the solvent by evaporation, (3) dissolving the silica particles by immersing the copper foil into an alkaline solution, (4) drying the copper foil coated by micro-porous membrane, (5) electrodepositing Sn onto the copper foil through the micro-pores in the micro-porous membrane, and (6) annealing as-obtained composite material. This method provided the composite material with high decentralization of Sn and supporting medium purpose of conductive carbon membrane deriving from pyrolysis of PAN. SEM, XRD and EDS analysis confirmed this structure. The characteristic structure was beneficial to inhibit the aggregation between Sn micro-particles, to relax the volume expansion during cycling, and to improve the cycleability of electrode. Galvanostatic tests indicated the discharge capacity of the composite material remained over 550 mAh g−1 and 71.4% of charge retention after 30 cycles, while that of the electrode prepared by electrodepositing Sn on a bare Cu foil decreased seriously to 82.5 mAh g−1 and 13%. These results show that the composite material is a promising anode material with larger specific capacity and long cycle life for lithium ion batteries.

Synthesis of Spherical Nano Tin Encapsulated Pyrolytic Polyacrylonitrile Composite Anode Material for Li-Ion Batteries

Study on Nano-Tin Encapsulated Polyacrylonitrile Composite Anode Materials

Synthesis of PAN/SnCl 2 composite as Li-ion battery anode material

Synthesis of nano Sb-encapsulated pyrolytic polyacrylonitrile composite for anode material in lithium secondary batteries

A Reduced Graphene Oxide/sno2/polyaniline Nanocomposite for the Anode Material of Li-ion Batteries

Synthesis of Si-SnSb/pyrolytic polyacrylonitrile composite anode for reversible lithium storage

A Si–SnSb/pyrolytic PAN composite anode for lithium-ion batteries

Incorporating Cyclized-Polyacrylonitrile with Li4Ti5O12 Nanosheet for High Performance Lithium Ion Battery Anode Material

Synthesis of nanosized Si composite anode material for Li-ion batteries

Facile Preparation of One-Dimensional Hollow Tin Dioxide@carbon Nanocomposite for Lithium-Ion Battery Anode

A New Process of Preparing Composite Microstructure Anode for Lithium Ion Batteries

Advanced Structures in Electrodeposited Tin Base Anodes for Lithium Ion Batteries

Tin Nanoparticles Encapsulated in Porous Multichannel Carbon Microtubes: Preparation by Single-Nozzle Electrospinning and Application As Anode Material for High-Performance Li-based Batteries.

Well-dispersed tin nanoparticles encapsulated in amorphous carbon tubes as high-performance anode for lithium ion batteries

Design and Synthesis of Graphene/sno2/polyacrylamide Nanocomposites As Anode Material for Lithium-Ion Batteries

Preparation of Sn∕C Microsphere Composite Anode for Lithium-Ion Batteries Via Carbothermal Reduction

Facile Synthesis of Ultrasmall Tin Oxide Nanoparticles Embedded in Carbon As High-Performance Anode for Lithium-Ion Batteries

Microwave-Assisted Synthesis of SnO2@polypyrrole Nanotubes and Their Pyrolyzed Composite As Anode for Lithium-Ion Batteries.

Synthesis of Uniform Polycrystalline Tin Dioxide Nanofibers and Electrochemical Application in Lithium-Ion Batteries

Polyacrylonitrile/graphene composite as a precursor to a sulfur-based cathode material for high-rate rechargeable Li-S batteries

Carbon nanofibers derived from carbonization of electrospinning polyacrylonitrile (PAN) as high performance anode material for lithium ion batteries