Experimental Study of Reactive Mixing In a Mini-Scale Jet Mixer by Laser Induced Fluorescence Technique

Liu Zhe,Cheng Yi,Jin Yong

2008-01-01

Abstract:null

What problem does this paper attempt to address?

Experimental study of reactive mixing in a mini-scale mixer by laser-induced fluorescence technique

Zhe Liu,Yi Cheng,Yong Jin

DOI: https://doi.org/10.1016/j.cej.2009.03.041

IF: 15.1

2009-01-01

Chemical Engineering Journal

Abstract:The liquid–liquid mixing process coupled with chemical reactions in a mini-scale jet mixer was visualized by reactive laser-induced fluorescence (reactive-LIF) technique for a deep understanding of the interplay between the mixing and the simultaneous reactions. A novel approach for implementing the reactive-LIF measurements was advanced in this work, where the principle was based on the quenching of the fluorescence signal emitted from the Rhodamine-B dye using the mechanism of Fenton reaction. The purely physical mixing and the reactive mixing processes were investigated extensively by comparing the concentration fields under different operating conditions, i.e. the different momentum ratios between the jet and the bulk flows, and the different Reynolds numbers in the mixing channel of a mini-scale mixer. The results revealed that the transient dynamics in the reactive mixing process cannot be precisely understood based on the time-averaged concentration fields from either the physical or the reactive mixing measurements. The coupled mixing and the reaction processes occurred simultaneously, unless the rapid mixing was achieved by tuning the operating conditions so that the processes can be decoupled into two isolated ones.
Hydrodynamics and Local Turbulent Mixing of Submerged, Parallel Liquid Jets: Experiments and CFD Simulations

Shuxian Jiang,Jiajun Wang,Lian-Fang Feng,Marc-Olivier Coppens

DOI: https://doi.org/10.1021/acs.iecr.9b04871

2020-01-01

Industrial & Engineering Chemistry Research

Abstract:The hydrodynamics and local turbulent mixing of parallel multiple liquid jets, submerged in liquid, were investigated by means of experiments and computational fluid dynamics (CFD). A renormalization group (RNG) k-epsilon turbulence model was used to simulate the flow field. The model was validated experimentally by particle image velocimetry (PIV) measurements. In the converging region adjacent to the nozzle exits, the recirculation region disappears, and there is only ambient fluid entrainment. Different jet arrays were compared to evaluate the effects of the jet spatial arrangement on the hydrodynamics and mixing performance. A shorter mixing length in the merging region suggests that mixing is more efficient in the triple-jet system than in other jet systems. Compared with the jet Reynolds number, the jet spacing plays a more significant role in determining the critical mixing regions, while the linear relationship between them is more sensitive than that for multiple parallel plane jets.
Experimental Study of Turbulent Mixing in A Tee Mixer Using Piv and Plif

G Pan,H Meng

DOI: https://doi.org/10.1002/aic.690471205

IF: 4.167

2001-01-01

AIChE Journal

Abstract:Turbulent scalar mixing in the nearfield of a tee mixer (transverse jet in a pipe) was studied using particle image velocimetry, and planar laser induced fluorescence. Two jet-to-pipe velocity, ratios r = 3.06 and r = 5.04 were investigated for a turbulent pipe flow at a Reynolds number of 20,850. Laser measurement techniques are described, typical flow structures in the nearfield of tee mixer, are examined, and turbulence statistics and scalar statistics are calculated. The general behavior of mixing is analyzed from the jet expansion and the concentration decay along the jet centerline, and the flow, condition for jet impingement on the pipe wall is estimated. The mixing mechanism in the near field is revealed from the variation of the scalar PDF across the jet. The mixing on the upstream side of the jet is dominated by large-scale structures and on the downstream side by, small eddies and turbulent diffusion, where the beta -PDF is all excellent approximation.
Effect of Ultrasonic Intensification on Synthesis of Nano-Sized Particles with an Impinging Jet Reactor

Yanqing Guo,Xiaogang Yang,Guang Li,Bin Dong,Luming Chen

DOI: https://doi.org/10.1016/j.powtec.2019.05.066

IF: 5.64

2019-01-01

Powder Technology

Abstract:The preparation of nanoparticles can be conducted in a fast way by intensifying the micromixing due to the enhanced turbulence in an impinging jet Reactor (IJR) where the two linear liquid jets collide with high velocity to diminish the segregation. However, the micromixing is significantly affected by the occurrence of the stagnant region which may partially choke the reaction chamber. By imposing the ultrasound to the IJR, micro-scale turbulent eddies generated as the result of collapse of ultrasonically generated micro cavitation bubbles may generate a strong local shear. Such micro-scale turbulent vortices exert shear on the interface between the particles and surrounding fluid, resulting in uniform particle morphology and high surface area for chemical reaction. The paper aims to optimize the ultrasonic intensification effect on synthesis of nano-sized particles with desired homogeneity, reveal the governing mechanisms and present a kinetic model to describe the multiphase flow dynamics in the IJR. Except for the experimental method, numerical method was also used to demonstrate the impact of fluid dynamics on particle synthesis.
Mixing characteristics and enhancement of excitation in mini confined impinging jets reactor

Kejiang DU,Weifeng LI,Zhihao SHAN,Haifeng LIU,Fuchen WANG

DOI: https://doi.org/10.11949/j.issn.0438-1157.20141811

2015-01-01

Abstract:An experimental study is undertaken on liquid mixing process in mini confined impinging jets reactor (CIJR) with excitation by using planar laser induced fluorescence (PLIF) technique quantitatively, and the jet inlet Reynolds number is in the range of 75 to 150. The results show that the mixing effect of two fluids significantly increases during the segregated steady flow translates to the dynamic chaotic flow regime in CIJR. The excitation affects the mixing process in CIJR and the mixing performance is enhanced in the segregated flow regime. However, the excitation has no significant influence on the mixing for the flow in the oscillation regime.
Intensification of liquid mixing and local turbulence using a fractal injector with staggered conformation

Shuxian Jiang,Marc-Olivier Coppens,Jiajun Wang

DOI: https://doi.org/10.1016/j.cep.2022.109042

IF: 4.264

2022-01-01

Chemical Engineering and Processing - Process Intensification

Abstract:Two self-similar, tree-like injectors of the same fractal dimension are compared, demonstrating that other geo-metric parameters besides dimension play a crucial role in determining mixing performance. In one injector, when viewed from the top, the conformation of branches is eclipsed; in the other one, it is staggered. The flow field and the fractal injector induced mixing performance are investigated through computational fluid dynamics (CFD) simulations. The finite rate/eddy dissipation model (FR/EDM) is modified for fast liquid-phase reactions involving local micromixing. Under the same operating conditions, flow field uniformity and micromixing are improved when a staggered fractal injector is used. This is because of enhanced jet entrainment and local tur-bulence around the spatially distributed nozzles. Compared with a traditional double-ring sparger, a larger re-action region volume and lower micromixing time are obtained with fractal injectors. Local turbulence around the spatially distributed nozzles in fractal injectors improves reaction efficiency.
Study on the reactive mixing process in an unbaffled stirred tank using planar laser-induced fluorescence (PLIF) technique

Yinyu Hu,Zhe Liu,Jichu Yang,Yong Jin,Yi Cheng

DOI: https://doi.org/10.1016/j.ces.2010.04.033

IF: 4.7

2010-01-01

Chemical Engineering Science

Abstract:The reactive mixing process in a stirred tank has drawn much attention due to the complex interplay between the hydrodynamics and the chemical kinetics. However, there is still a lack of effective measurement techniques to explore the detailed information. To quantify the reactive mixing process, a novel reactive planar laser-induced fluorescence (reactive-PLIF) technique was developed to visualize how the two liquids mixed and reacted with each other. The main principle was to capture the process characterized by the fluorescence signal of the tracer dye (i.e., Rhodamine B), which varied in time and space because of being oxidized by the oxidant (i.e., the hydroxyl radical OH) generated between Fe2+ and H2O2 (i.e., a Fenton reaction). The behaviors were recorded by a high-speed digital camera and quantitatively analyzed. The influences of the impeller rotation speed, the impeller position and the liquid properties on the processes were evaluated. The relationship between the reactive mixing and the physical mixing can be determined by the results from the (reactive-)PLIF measurements. This novel technique enabled the convenient measurement of liquid mixing process with reactions at a low cost.
Experimental Study about Mixing Characteristic and Enhancement of T-jet Reactor

Wei-feng Li,Yan Wei,Gong-yi Tu,Zhe-hang Shi,Hai-feng Liu,Fu-chen Wang

DOI: https://doi.org/10.1016/j.ces.2016.01.024

IF: 4.7

2016-01-01

Chemical Engineering Science

Abstract:Mixing performances of fluids in three types of T-jet reactors were experimentally studied by planar laser induced fluorescence (PLIF) at 25≤Re≤200. The effects of Reynolds numbers, geometric parameters (jet separation and headspace of the channel) and excitation of pulsed inflow in the range of 0.5–25.0Hz on the mixing performances in T-jet reactors have been investigated. Results show that the increasing Reynolds number is the primary factor for the enhancement of mixing rate during the transition from the segregated flow to the oscillation regime in T-jet reactors. The flow in the T-jet reactor with L/h>6 and w/h≥8 (where L is the injector separation, w and h are the width and height of the injector) has been verified to display a half deflecting oscillation at small Reynolds numbers, which will enhance the mixing rate of fluids significantly. The mixing in T-jet reactors at low Reynolds numbers can be effectively enhanced by the excitation with low frequencies, as a periodic oscillation is induced by the pulsed inflow, which further causes the continuous folding and stretching of the impingement plane in T-jet reactors.
Study on the mixing behavior of thin liquid-sheet impinging jets using the PLIF technique

PeiCheng Luo,Yi Cheng,ZhanWen Wang,Yong Jin,Wanhong Yang

DOI: https://doi.org/10.1021/ie050963c

2006-01-01

Industrial & Engineering Chemistry Research

Abstract:A thin liquid-sheet impinging jet is proposed for the application of fast liquid mixing with low viscosity and studied experimentally using the nonintrusive planar laser-induced fluorescence (PLIF) technique. The design of the jet consists of two separate liquid sheets flowing in each channel of 2-mm thickness, which impinge on each other at an impingement angle of 30 degrees or 45 degrees with a free mixing zone or a restricted zone. The mixing process is visualized by the PLIF technique with the addition of Rhodamine B as the dye, where the concentration distribution of the traced liquid sheet is represented by the received fluorescent light strength. The results are characterized quantitatively by contours of the mean concentration, deviations of the concentration fluctuations, the intensity of segregation (IOS), and the 95% mixing, time (tau(95))- It is found that the mixing efficiency of a jet with a restricted impingement zone is remarkably higher than that of a jet with a free impingement zone; a larger impingement angle between the two liquid sheets and a larger velocity ratio of the outer liquid sheet to the inner one promote the mixing performance characterized by more homogeneous mixing at shorter times.
Fast Liquid Jet Mixing in Millimeter Channels with Various Multislits Designs

Zhe Liu,Yi Cheng,Yong Jin

DOI: https://doi.org/10.1021/ie800344p

2008-01-01

Industrial & Engineering Chemistry Research

Abstract:The jet flow mixers in which fluids are mixed in the confined millimeter-sized channels were further studied to better understand the fast liquid mixing process and the means to intensify the mixing performance. Four mixer designs with different modifications on the local configuration for adjusted contact mode between liquids were investigated by visualizing the mixing processes using planar laser-induced fluorescence (PLIF) technique. A large amount of experiments with various operating conditions were carried out for all the four designs. The common feature in all the cases was that the two liquids can be mixed well in milliseconds, where the momentum ratio between the bulk and the jet flows played a significant role in the mixing performance. The results also demonstrated that the contact mode between the two liquids had a great effect on the mixing performance. By dividing the side-jet liquid stream into several smaller aperture-jets, the mixing process can be clearly improved, which can be attributed to the increased contact area and the higher velocity difference between the two liquids.
Millisecond Mixing of Two Liquid Streams in a Mixer Model

Peicheng Luo,Yi Cheng,Yongzhi Zhao,Yong Jin,Wanhong Yang

DOI: https://doi.org/10.1016/j.ces.2007.02.038

IF: 4.7

2007-01-01

Chemical Engineering Science

Abstract:Fast liquid mixing in the flow channels at millimeter size was studied by planar laser induced fluorescence (PLIF) technique in experiments and the large eddy simulation (LES) as well. A simplified mixer model was applied, where two liquid streams impinge into each other in the confined channels. A dynamic kinetic energy sub-grid scale (SGS) model of LES was employed to simulate the fast liquid mixing. The results show that LES predictions with high-density meshes have good agreement with the experimental data in terms of the instantaneous and time-averaged concentration fields, and the probability density function (PDF) of concentration fluctuations. Hence, the mixing quality characterized by the intensity of segregation (IOS) and 95% mixing time can be also predicted reasonably. The LES simulations further predict the significant effect of cross-flow angle on the mixing process. The cross-flow angle of 90∘ gives the fastest mixing of two liquids in the millimeter channels at 1–2ms. The mixing layer between the two liquid streams cannot be observed under the geometry with larger cross-flow angles. This indicates different mixing mechanisms compared with the mixing of two liquids flowing in parallel. Vorticity in the turbulent mixing process is discussed for a better understanding on the physical factors controlling the mixing process.
Study of Fast Liquid-Liquid Micromixing Using PLIF Technique

LUO Peicheng,CHENG Yi,WANG Zhanwen,JIN Yong,YANG Wanhong

DOI: https://doi.org/10.3321/j.issn:0438-1157.2005.12.006

2005-01-01

Abstract:Planar laser induced fluorescence (PLIF) technique was established to study the liquid-liquid turbulent micromixing process. A typical process of liquid-liquid cross-flow mixing in flow channels at millimeter scale was visualized by using this non-invasive measurement technique.Transient measurements of concentration field highlighted by the excited fluorescence dye were recorded. A wave-like vortex structure at the scale of 1 to 2 millimeter was found after the two liquid cross flows met each other. The results showed that the development of the vortex was the main factor affecting the mixing performance.The mixing process was also analyzed quantitatively by using the intensity of segregation (IOS).The trend of IOS value vs y locations was also illustrated and the effect of velocity ratio of two liquid flows and Reynolds number of the mixing liquid flow on the mixing process was studied.
Experimental Study on Turbulence Properties in the Dual Nozzle Opposed Impinging Stream Mixer

Jianwei Zhang,Junjie Yan,Xin Dong,Panlong Shang,Ying Feng

DOI: https://doi.org/10.1002/cjce.22662

2017-01-01

Abstract:The impinging stream reactor currently under study, especially in processes of fluid mixing, is employed in a variety of applications that include pharmaceuticals, petroleum, and provisions. The distributions of three‐dimensional velocity fluctuation in the dual nozzle opposed impinging stream mixer were measured experimentally using laser Doppler velocimetry (LDV). The results showed that stagnation points were in proximity of the line of z = 0 under experimental conditions, but the exact positions of these stagnation points shifted with different nozzle diameters, nozzle spacing, and inlet flow rates. The distributions of RMS velocity and turbulent kinetic energy were similar in the same operating condition, but turbulence intensity changed obviously on the z axis ranging from −10 mm to 30 mm, in which region turbulence was intense and the large turbulence intensity was advantageous to mixing. The RMS velocity was influenced obviously by changing distance between nozzles, the turbulence intensity was affected greatly by the nozzle diameters, and the region of high turbulent kinetic energy which was beneficial to mixing was enlarged by increasing inlet flow rates.
Visualization of reactive and non-reactive mixing processes in a stirred tank using planar laser induced fluorescence (PLIF) technique

yinyu hu,wentan wang,ting shao,jichu yang,yi cheng

DOI: https://doi.org/10.1016/j.cherd.2011.08.021

IF: 4.119

2012-01-01

Chemical Engineering Research and Design

Abstract:A comprehensive study on the liquid mixing with/without instantaneous reactions was conducted using planar laser induced fluorescence (PLIF) technique, where a novel reactive PLIF technique was adopted to quantitatively visualize the dynamic variation of the concentration of fluorescence dye due to signal quenching by a Fenton reaction. The factors (e.g., tracer injection direction, tracer injection position, impeller speed) influencing the reactive and non-reactive mixing processes were investigated, and the mixing performances were characterized by non-reactive mixing times (tau(95) and tau(99)), and reactive mixing time (theta(99)), respectively. The experimental results from the 2-D measurements of liquid mixing behavior emphasized the significance of the understanding on the spatio-temporal mixing patterns: not only did the tracer injection position affect the mixing performances in the stirred tank, but also the sampling position to monitor the mixing status would lead to a large difference in evaluating the mixing performance. For the stirred tank with fast reactions, the reactive mixing performance had a strong interplay with the non-reactive mixing. (C) 2011 The Institution of Chemical Engineers. Published by Elsevier B.V. All rights reserved.
Application of laser-induced fluorescence technique in visualization of liquid mixing process

WANG Wentan,ZHANG Mengxue,ZHAO Shufang,LIU Zhe,JIN Yong,CHENG Yi

DOI: https://doi.org/10.3969/j.issn.0438-1157.2013.03.001

2013-01-01

Abstract:Among a variety of experimental methods to study the liquid-liquid mixing process,quantitative visualization techniques can display the mixing effects at different locations in the flow field simultaneously,as well as the evolution of the mixing process with time.The laser-induced fluorescence technique,a non-intrusive,highly accurate,easy-to-implement quantitative visualization technique,is widely used to study liquid-liquid mixing behavior in the chemical processes.This review introduces the principles and implementation methods of laser-induced fluorescence technique and discusses the progress of its applications in the investigation of both non-reactive and reactive mixing behavior.The outlook of some potential areas of this technique is also presented.
Study on the Mixing Performance of New Microextraction Mixer

Jia-bin ZHU,Qiang YANG,Hao LU

DOI: https://doi.org/10.3969/j.issn.0254-6094.2018.02.005

2018-01-01

Abstract:A new microextraction mixer which integrated with advantages of jet mixer and SV static mixer was designed.Making use of the image measurement method to compare mixing performance of above-said mixers was implemented,including the adoption of diesel oil-in-water system and establishing evaluation index of the mixing performance in the mixer, as well as the discussion of influences of both operating condition and mixer's shape on the mixing performance and pressure drop.
Mixing in the Confined Vortical Flow in Non-Aligned T-jets Reactors

Wei Zhang,Hongyu Chen,Xu-dong Xu,Wei-feng Li,Hai-feng Liu,Fu-chen Wang

DOI: https://doi.org/10.1016/j.cep.2022.108929

IF: 4.264

2022-01-01

Chemical Engineering and Processing - Process Intensification

Abstract:In this work, flow dynamics and mixing performances in a non-aligned T-jets reactor are experimentally studied within a Reynolds number (Re) range of 50-160. Plane Laser-Induced Fluorescence (PLIF) is used to measure concentration fields and explore underlying vortical flow structures. Two vortex rings are identified in the mixing channel of the reactor at Re >= 90, and the fluid pulsation induced by the vortex ring is demonstrated. The mixing in the reactor is qualified by an area-based distribution of mixing intensity, and the scale and intensity of segregation. Results show that the scale and intensity of segregation are reduced as the vortex ring appears, and the overall mixing is closely associated with vortex rings and the fluid pulsation, of which the former dominates. Further insight into the mixing is obtained by analyzing the decay time of the fluid. It is found that long decay time of the fluid in vortex rings causes the formation of well-mixed regions, and the concentration decay time in the second vortex ring is more than twice that in the first vortex ring despite the smaller size of the second vortex ring.
Investigation of three-dimensional flow regime and mixing characteristic in T-jet reactor

Jing-wei Zhang,Shao-fan Liu,Chen Cheng,Weifeng Li,Xin-lei Xu,Haifeng Liu,Fuchen Wang

DOI: https://doi.org/10.1016/j.cej.2018.10.112

IF: 15.1

2019-01-01

Chemical Engineering Journal

Abstract:Three-dimensional flow regimes in the T-jet reactor were experimentally studied by planar laser induced fluorescence (PLIF) at 50 <= Re <= 560. The visualization images on cross-sections at different Reynolds numbers were obtained to investigate the engulfment flow regime and its influence on the mixing. With unsteady engulfment flow, periodic vortex merging in the impingement plane is observed and characterized. Results show that the merged vortex passes through the channel and causes periodic oscillation in the chamber. The effect of the confinement of the chamber wall on the engulfment flow regime was discussed. Large eddy simulation is also used to investigate the variation of pressure and velocity of the oscillation caused by the unsteady engulfment flow. Time-evolution and average of Intensity of Segregation (IOS) were quantitatively analyzed to reveal the mixing mechanism. Results show that the oscillation of vortex merging in the unsteady engulfment flow regime significantly improves the mixing performance.
Numerical Simulation on Micromixer Based on Synthetic Jet

Minghou Liu,Chen Xie,Xiangfeng Zhang,Yiliang Chen

DOI: https://doi.org/10.1007/s10409-008-0183-9

IF: 3.5

2008-01-01

Acta Mechanica Sinica

Abstract:This paper studied a concept of micromixer with a synthetic jet placed at the bottom of a rectangular channel. Due to periodic ejections from and suctions into the channel, the fluids are mixed effectively. To study the effects of the inlet velocity, the jet intensity and frequency, and the jet location on the mixing efficiency, 3-D numerical simulations of the micromixer have been carried out. It has been found that when the jet intensity and the frequency are fixed, the mixing efficiency increases when Re < 50, and decreases when Re > 50 with the best mixing efficiency achieved at Re = 50. When the ratio of the jet velocity magnitude to the inlet velocity is taken as 10 and the jet frequency is 100 Hz, the mixing index reaches the highest value. It has also been found that to get better mixing efficiency, the orifice of the synthetic jet should be asymmetrically located away from the channel's centerline.
Experimental study on the dispersed phase macro-mixing in an immiscible liquid–liquid stirred reactor

dang cheng,xin feng,jingcai cheng,chao yang,zaisha mao

DOI: https://doi.org/10.1016/j.ces.2014.12.033

IF: 4.7

2015-01-01

Chemical Engineering Science

Abstract:The spatial nonuniformity of solute concentration in the dispersed phase of immiscible liquid–liquid dispersion is smeared out by coalescence and breakup of drops, which has a very significant effect on the productivity of relevant chemical processes. Novel experiments have been designed to visualize and quantify accurately the macro-mixing within the dispersed phase using the planar laser induced fluorescence (PLIF) method combined with a refractive index matching technique in this work. Batch experiments are carried out in a stirred reactor for an electrolytic solution dispersed in silicone oil. It is revealed that the dispersed phase macro-mixing behavior differs much from that of the continuous phase of multiphase systems and is heavily dependent upon the drop interaction rate and thus power consumption. The dispersed phase mixing time decreases with the increase of the dispersed phase volume fraction. Dispersed phase mixing time varies inversely with the power consumption per unit volume dispersion. The effect of impeller type on the dispersed phase mixing time is greatly different from that on the continuous/single phase mixing time. The effect of radial impeller clearance on the dispersed phase mixing time is contrary to that on the continuous/single phase mixing time.

Experimental Study of Reactive Mixing In a Mini-Scale Jet Mixer by Laser Induced Fluorescence Technique

Experimental study of reactive mixing in a mini-scale mixer by laser-induced fluorescence technique

Hydrodynamics and Local Turbulent Mixing of Submerged, Parallel Liquid Jets: Experiments and CFD Simulations

Experimental Study of Turbulent Mixing in A Tee Mixer Using Piv and Plif

Effect of Ultrasonic Intensification on Synthesis of Nano-Sized Particles with an Impinging Jet Reactor

Mixing characteristics and enhancement of excitation in mini confined impinging jets reactor

Intensification of liquid mixing and local turbulence using a fractal injector with staggered conformation

Study on the reactive mixing process in an unbaffled stirred tank using planar laser-induced fluorescence (PLIF) technique

Experimental Study about Mixing Characteristic and Enhancement of T-jet Reactor

Study on the mixing behavior of thin liquid-sheet impinging jets using the PLIF technique

Fast Liquid Jet Mixing in Millimeter Channels with Various Multislits Designs

Millisecond Mixing of Two Liquid Streams in a Mixer Model

Study of Fast Liquid-Liquid Micromixing Using PLIF Technique

Experimental Study on Turbulence Properties in the Dual Nozzle Opposed Impinging Stream Mixer

Visualization of reactive and non-reactive mixing processes in a stirred tank using planar laser induced fluorescence (PLIF) technique

Application of laser-induced fluorescence technique in visualization of liquid mixing process

Study on the Mixing Performance of New Microextraction Mixer

Mixing in the Confined Vortical Flow in Non-Aligned T-jets Reactors

Investigation of three-dimensional flow regime and mixing characteristic in T-jet reactor

Numerical Simulation on Micromixer Based on Synthetic Jet

Experimental study on the dispersed phase macro-mixing in an immiscible liquid–liquid stirred reactor