Abstract:This study investigates the alternative of replacing noble metals by base metals as catalysts for selective hydrogenation of polyunsaturated hydrocarbons. Nickel catalysts are active for this type of reaction, but poorly selective. However, former calculations anticipated that Ni–Zn alloys could have higher selectivity to alkenes than monometallic Ni depending on the Ni/Zn atomic ratio in the alloy. In this contribution, Ni–Zn alloy nanoparticles supported on TiO2 are synthesized as catalysts for selective hydrogenation of acetylene and butadiene. The designed catalysts with 0.5 wt% Ni loading and various Ni/Zn nominal ratios are prepared by deposition–precipitation with urea (DPU). STEM-HAADF imaging coupled with EDS analysis reveals that Ni–Zn bimetallic particles are formed after reduction treatment at 450 °C. Alloying Ni with Zn leads to a slight increase in the average particle size and a broadening of the size distribution compared to monometallic Ni. However, the average Ni/Zn atomic ratio measured by EDS in the bimetallic particles is always higher than the nominal one, which could be due to Zn evaporation under the beam. The results of acetylene hydrogenation show that although the catalytic activity is slightly reduced after alloying Ni with Zn, the selectivity to ethylene is enhanced from 50% up to 85%, at the expense of the formation of oligomers (coupling products). However, the bimetallic Ni–Zn catalysts suffer from progressive deactivation in this reaction. During butadiene hydrogenation performed in the presence of an excess of propene, the bimetallic Ni–Zn/TiO2 catalysts are significantly more stable, with a high and constant selectivity to butenes (> 95%), compared with Ni/TiO2, which deactivates rapidly in the first hours. Some hypotheses concerning the observed differences in catalytic stability are discussed.

Study on the calcination conditions of the Ni/Al2O3 catalyst to remove butadiene in fcc c4 fraction

Catalytic Decarbonylation Of Stearic Acid To Hydrocarbons Over Activated Carbon-Supported Nickel

Theoretical study the influence of partial substitute noble metal Pd/Ag of PdAg-based catalyst by non-noble metal Ni/Cu for 1,3-Butadiene hydrogenation

Effect of Carbon Modification on the Performance of NiO/gamma-Al2O3 Catalyst for Isobutane Dehydrogenation

Promotional effects of Nb 2 O 5 on ceria doped Ni catalysts for selective hydrogenation of 1,3-butadiene to butenes: Combined experimental and DFT approach

Effects of preparation conditions for Ni/γ-Al2O3 catalyst on saturated hydrogenation of naphthalene

Oxidative Dehydrogenation and Dry Reforming of N-Butane with CO2 over NiFe Bimetallic Catalysts

Effect of Calcination Atmosphere on the Performance of Cu/Al2O3 Catalyst for the Selective Hydrogenation of Furfural to Furfuryl Alcohol

InNi 3 C 0.5 @C-derived InNi 3 alloy as a coke-resistant low-temperature catalyst for selective butadiene hydrogenation

Effects of Calcination Temperature on the Catalytic Performance of Ni-Al2 O3 Catalyst

Hydrogenation of High-Concentration Monovinylacetylene for Butadiene Production over Pd-Pb/SiO2 Catalysts

Bimetallic Ni–Zn/TiO2 catalysts for selective hydrogenation of alkyne and alkadiene impurities from alkenes stream

Improving Anti-Coking Properties of Ni/Al2O3 Catalysts via Synergistic Effect of Metallic Nickel and Nickel Phosphides in Dry Methane Reforming

Preparation of Raney Ni Catalyst and Research on Its Catalytic Hydrogenation Performance for Alkenyl Aromatics

Preparations,Structures and Properties of Amorphous Ni-P Alloy Catalysts

Composition effect of metal species in (Ni, Fe, Co)-Bi-O/gamma-Al2O3 catalyst on oxidative dehydrogenation of n-butane to butadiene

Selective Hydrogenation of Naphthalene over γ-Al2O3-Supported NiCu and NiZn Bimetal Catalysts

Effect of Preparation Process on Compressive Strength and Hydrogenation Performance of Raney-Ni/Al2o3 Catalyst

Precisely Controlled Porous Alumina Overcoating On Pd Catalyst By Atomic Layer Deposition: Enhanced Selectivity And Durability In Hydrogenation Of 1,3-Butadiene

Preparation of Supported Skeletal Ni Catalyst and Its Catalytic Performance on Dicyclopentadiene Hydrogenation

Ni–Co–Cu Supported on Pseudoboehmite-Derived Al2O3: Highly Efficient Catalysts for the Hydrogenation of Organic Functional Groups