Abstract:Wearable electronics are becoming more and more popular, and in order to ensure the safety and accuracy of wearable electronics, the requirements for the refinement and stability of flexible electrodes are getting higher and higher. The reduction of the amount of ink jet and the reduction of surface charge density and electrostatic stress near the nozzle hole can significantly improve the jetting state of the ink. And nozzle voltage is a key factor that affects them. The spreading of ink droplets on the substrate and the formation of a specific pattern is a dynamic process, which is closely related to the properties of the substrate and the state of the ink droplets. In this paper, PEN is used as the substrate to print silver electrode, with its good thermal stability and good mechanical properties. In order to solve these problems and improve the accuracy of the electrode pattern on PEN substrate, a joint control method of ink drop spacing and nozzle voltage is proposed. It is found that the accuracy of the pattern increases with the increase of the drop spacing. At 45 μm, 90.91 % of the pattern accuracy with the ideal pattern can be achieved. As the nozzle voltage decreases, so does the satellite spot. And at 25 V, it can achieve satellite-free spot printing. Because this method avoids the adjustment of ink properties and the regulation of voltage waveform, this advancement provides a simpler solution for patterned high-precision printed silver electrodes based on flexible substrates. In addition, a silver electrode with a resistivity of 3.43 μΩ·cm was obtained at an annealing temperature of 160 °C. The resistivity change of the electrode only 7.58 % under 5000 times of bending. This is very rare in flexible electrodes.The silver film on the PEN substrate exhibited excellent adhesion under the tape test. XPS depth profiling was used to characterize the elemental states of the films at different depths. The results indicated that the coordination bond between the PEN substrate and the Ag film resulted in good bending resistance, which gives a persuasive explanation for the first time. This result is also due to the precise handling of the film, which also results in a homogeneous distribution of the film. It solves the problem of poor adhesion of silver electrodes based on other substrates or other preparation methods. Therefore, silver electrodes based on PEN substrates have a broad application prospect in the field of flexible wearable electronics.

Preparation of electrodes technique on polymer substrate surface by self-assembly technique

A Facile Process Combined with Inkjet Printing, Surface Modification and Electroless Deposition to Fabricate Adhesion-Enhanced Copper Patterns on Flexible Polymer Substrates for Functional Flexible Electronics

Adhesion-Enhanced Flexible Conductive Metal Patterns on Polyimide Substrate Through Direct Writing Catalysts with Novel Surface-Modification Electroless Deposition

Directly Electroplated Metallization on Flexible Substrates Based on Silver Nanowire Conductive Composite for Wearable Electronics

Fabrication of gold microelectrodes on polystyrene sheets by UV-directed electroless plating and its application in electrochemical detection

High-precision silver electrode based on PEN substrate with robust mechanical performance

Direct writing patterns for electroless plated copper thin film on plastic substrates

Compatible Ag+ Complex-Assisted Ultrafine Copper Pattern Deposition on Poly(ethylene Terephtalate) Film with Micro Inkjet Printing

Electroless Deposition Metals On Poly(Dimethylsiloxane) With Strong Adhesion As Flexible And Stretchable Conductive Materials

An accessible strategy for high-performance copper layer fabrication on polyphenylene oxide substrates via polydopamine functionalization and electroless deposition

Facile preparation of high conductive silver electrodes by dip-coating followed by quick sintering.

Facile Method for Printing Reliable Sliver Patterns on Polymer Film

A simple, low-cost approach to prepare flexible highly conductive polymer composites by in situ reduction of silver carboxylate for flexible electronic applications

A facile process to fabricate metal coating on PET sheet: Preparation of highly active polymer brush/Ag particle and its application in electroless copper plating

Fabrication of metallic patterns on ordinary polymer substrates by laser direct activation and electroless plating

Molecular Self-Assembly Combined with Electroless Copper Plating of Laser-Induced Patterning on Polyimide Film

In-situ chemical polymerization of Cu-Polythiophenes composite film as seed layer for direct electroplating on insulating substrate

Uniform Silver Nanowire Patterned Electrode on Robust PEN Substrate Using Poly(2-hydroxyethyl methacrylate) Underlayer

Fabricating patterned polyelectrolyte brushes by dynamic microprojection lithography for selective electroless metal deposition

A facile process to fabricate electroless plating on PET sheet: Effects of surface roughness on adhesive force, electronic and structural properties of copper coating

Ingenious Method for Rapid Fabrication of a Highly Conductive Hybrid Film of Printed Cu Nanoparticle Layers Plated by Ag Nanoplates on a PET Substrate at Room Temperature