Abstract:In order to make the eletrochemical real-time quantitaive PCR instrument meet the requirements of temperature characterstics in the process of PCR amplification, some optimizations in structure and material of conventional PCR chip were made to fabricate a multi-channel electrochemical real-time quantitative PCR chip. By using finite element simulation software ANSYS, temperature characteristics of the PCR chip were analyzed. According to the analysis results, insulation and thermal compensation were used to improve the thermal cycle system for electrochemical real-time quantitative PCR instrument, which was proved effective in the simulation test. Annular structure was applied to improve the consistency of temperature among every channel of the chip. Meanwhile, considering the character of the electrochemical detection, the structure of three layers, consisting of mono-crystalline silicon, aluminum and polycarbonate, was adopted to reduce the thermal hysteresis of the chip's reaction pool. Then, we simulated the temperature field of the chip based on its finite element model. Through the steady-state analysis, the thicknesses of the insulation layers and the thermal compensation temperature were determined so as to weaken the heat transfer effect between the chip and the peripheral air, which could improve the accuracy and uniformity of the chip's temperature. Furthermore, the thermal hysteresis and homoiothermy of the chip were tested in the improved thermal cyde system through transient analysis. The thermal analysis results of the chip in the improved thermal cyde system were as follows. The uniformity and accuracy errors of the temperature was less than 0.2°C. The temperature consistency error was 0°C among every channel of the chip. The ascending and cooling speeds were 4°C/s and 3°C/s, respectively. The facts indicated that the temperature characteristics of the thermal cyde system could meet the performance requirements of the PCR instrument well.

Simulation and Design of a Self-Heating Continuous-Flow PCR Chip

FEA for Steady-State Thermal Performance of PCR Thermal-Cycler Based on Thermoelectric Cooler

Design and Thermal Analysis of a Micro-Chamber PCR Integrated Chip

Design and Numerical Analysis of A Joule-Heating-Induced Continuous-Flow Polymerase Chain Reaction Microchip

A Heater-Integrated Transparent Microchannel Chip for Continuous-Flow PCR

Numerical Simulation of Micro Flow-Through Pcr Chip

Study on Large Area Temperature Control System for a Low-cost PCR Chip

The Design And Manufacture Of Functional Micro-Stationary Pcr Chip

Simulation analysis and experimental verification of thermodynamic characteristics of integrated droplet digital PCR chip

Thermal Design of PCR Chip Based on Natural Convection in a Micro Chamber

A Design and FEA-simulation of a Micro-PCR Chip on Polymer

Analysis on PCR Chip With Reusable Electrodes and its Temperature Field

Design and Experiment of a PDMS-based PCR Chip with Reusable Heater of Optimized Electrode

A PCR Chip with Reusable Electrodes and Its Temperature Analysis

Study on a Low Power and High Efficiency Micro Heater Used in Μpcr Chip

Multichannel Oscillatory-Flow PCR Micro-Fluidic Chip with Controllable Temperature Gradient

Simulation of Rapid Thermal Cycle for Ultra-Fast PCR

Simulation and experimental study of PCR chip based on silicon

Polymerase Chain Reaction Chip with Microchannel of Glass Capillaries Embedded

Research on the Temperature Characteristics of Thermal Cycle System for Electrochemical Real-time Quantitative PCR Instrument

MEMS-based Micro Chamber PCR Chip Thermal Analysis and Structural Improvement