Abstract:Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, Ahead of Print. Porous metal materials are widely used in heat-absorbing, biomedical parts and other fields because of their excellent mechanical properties and biocompatibility. Further applications of porous metal materials are inseparable from secondary precision machining. However, traditional cutting methods tend to compromise the original porosity of the material surface. Electrical discharge machining (EDM) is a type of non-conventional machining method which is more preferable to overcome these defects. In the present study, the main target is to investigate the effect of four input electrical machining parameters (current, frequency, efficiency and gap voltage) on the five output responses (material removal rate (MRR), electrode wear, surface roughness (SR), noise and time consumption value of environmental particulate matter (PM2.5)) when electrical discharge machining porous 316L stainless steel and compared with that of pure 316L stainless steel. The Taguchi method was employed to determine the relationship between electrical discharge machining parameters and output responses. The analysis of variance (ANOVA) was used to evaluate the effect of input parameters on output responses. The effects of electrical machining parameters on above responses were analyzed by main effects, and the order of influence was obtained, respectively. Finally, the surface morphology was observed by scanning electron microscope (SEM), and the effect of electrical machining parameters on the characteristics and formation of machined surface of porous stainless steel was mainly analyzed.

Comparative experimental study of machining characteristics of air-mixed EDM and conventional EDM

Experimental Research on Machining Performance of Electrode Materials in Dry Edm

Experimental Study of EDM Machining Performance with Liquid Microemusion

An Orthogonal Experimental Analysis of Electrical Discharge Machining of Particle Reinforced Metal Matrix Composites with Concavo-Convex Electrode

Surface performance of workpieces processed by electrical discharge machining in gas

Effect of Dielectric Medium on Electrode Wear in Micro-Electrical Discharge Milling

Experimental Investigation on the Effects of Green Dielectric Medium Air and Argon on the Near-Dry Electrical Discharge Machining of Titanium Alloy

Single Pulse Studies of the Electrical Discharge Machining of Metal Matrix Composite Materials

Research on Machining Characters of Bunched-Electrode Electrical Discharge Machining

Experimental research on EDM-milling of sintered NdFeB

Experimental Study of Mist-Jetting Electric Discharge Milling

Research on Processing Law of Micro-EDD in Air

Experimental Investigation on Metal Matrix Composite of Abrasive Particles Aided Electrical Discharge Machining

High-speed Near Dry Electrical Discharge Machining

Effects of gas medium on submersed gas-flushing electrical discharge machining of different metal materials

A Study of the Mechanism of Electrical Discharge Machining of Particle Reinforced Metal Matrix Composites with Concavo-Convex Electrode

Study on the Influence of the Spindle Servo System Parameters on Mixed -Air Electrical Discharge Machining Technology Performance

Experimental Investigation on the Discharge Stability in Micro-Edm Based on Finite-Successive Pulses Discharge Method

Experimental study on electrical discharge machining of porous and pure 316L stainless steel

Influence of Tool Electrode Material on Material Removal and Surface Integrity in Electrical Discharge Machining

Experimental investigations and process optimization of SKD61 for sinking EDM