Reaction of NaBH 4 and NaB(OH) 4 as a way to increase the yield of hydrogen in catalytic hydrolysis of sodium borohydride by water
Mikhail V. Solovev,Georgiy V. Malkov,Anastasiia O. Antonenko,Anastasiia A. Reveguk,Dmitriy I. Elets,Alexey S. Maystro,Pavel Yu. Buldakov,Yuriy A. Dobrovolsky,Alexey V. Shihovtsev,Maxim V. Tsvetkov,Oleg V. Kravchenko
DOI: https://doi.org/10.2139/ssrn.4632409
IF: 7.4
2024-01-16
Fuel
Abstract:In this work, sodium tetrahydroxoborate (NaB(OH) 4 ) that is the main product of the hydrolysis reaction of NaBH 4 with a relatively small excess of water is studied in the reaction with sodium borohydride in the presence of a catalyst and without it. It was found, that mixtures consisting of NaB(OH) 4 and NaBH 4 begin to melt at 70 °C with the formation of a liquid phase without destroying the close coordination environment for both types of boron atoms. When a cobalt-based catalyst is added to mixtures, significant hydrogen evolution is observed. The resulting products are hydrogen and amorphous borates with a gross composition close to [NaBO 2 ·0.75H 2 O]. Carrying out the catalytic hydrolysis of borohydride in the system of initial composition H 2 O:NaBH 4 :catalyst under the conditions same to that the catalytic reaction of NaBH 4 and NaB(OH) 4 was observed is a promising way to produce H 2 since it provides a high yield of hydrogen at small amounts of catalyst and atmospheric pressure. Catalytic hydrolysis carried out in the temperature range 80–120 °C with initial molar ratios H 2 O:NaBH 4 = 3 and 2.7, and atmospheric pressure demonstrates a hydrogen yield of 8.3 wt% and NaBH 4 conversion of 96 % at only 2.3 wt% of CoCl 2 as catalyst. Since the resulting final composition of borates is close to [NaBO 2 ·0.66H 2 O], the potential mass yield of hydrogen in this process can reach 9.3 wt%.
energy & fuels,engineering, chemical