Abstract:Herein, a stable LiNbO3 (LN) sol, with different Zn2+ contents, is prepared using ethanol niobium, lithium acetate and zinc acetate as starting materials, absolute ethanol as a solvent, and acrylic acid and benzoyl acetone (BzAcH) as additives. The influence of Zn2+ content on LN crystal structure, light transmittance and J-V curve characteristics is studied in detail. XRD results reveal that Zn2+ doping, with a molar content of less than 5%, does not influence the crystal structure of LN. SEM indicates that the grain size of LN films gradually increases with the increase of doping content. The surface quality of LN films becomes worse when the doping content of Zn2+ reaches 5%. Moreover, light transmittance tests show that the maximum light transmittance is attained at the doping amount of 3%. J-V curves demonstrate that Pt/LN/LNO(LaNiO3) structure shows excellent resistance switching (RS) effect due to the formation of Schottky barrier at the Pt/LN interface, which initially becomes prominent with the increase of Zn2+ content, followed by a gradual decrease. On the other hand, In/LN/LNO structure exhibits poor RS effect due to the unobvious Schottky barrier at In/LNO interface. Furthermore, J-V curves at different temperatures demonstrate that the RS effect of Pt/LN/LNO structure tends to deteriorate, while the refractive index of LN film increases with the decrease of temperature. Herein, the abovementioned RS phenomenon is analyzed and explained in terms of the relationship between interfacial barrier and doping amount of Zn2+, migration of oxygen vacancies, and the relationship between insulation property of LN films and temperature. The research results are of experimental and theoretical significance for practical applications of LN films.

Comparison of Li+-doping sources on properties of ZnO piezoelectric films

Preparation and Characterization of Na-doped ZnO Thin Films by Sol–gel Method

Preparation and Characterization of Mg-doped ZnO Thin Films by Sol–gel Method

Influence of Dopant Content on Morphology and Optical Constants of ZnO:Na Films by Sol-Gel Method

Sol–gel derived (Li, Mg): ZnO films with high c-axis orientation and electrical resistivity

Surface Morphology and Optical Properties of Na-doped ZnO Thin Films

Characterization and doping effects study of high hole concentration Li-doped ZnO thin film prepared by sol–gel method

Influence of post-annealing temperature on properties of ZnO:Li thin films

Structural and Photoluminescent Properties of Li-Doped Zno Film Prepared by Sol-Gel Technique

Microstructure and Electrical Properties of Al-doped ZnO Thin Films

Mg doping effects on the microstructure and piezoelectric characteristics of ZnO:Li films deposited at room temperature using an RF sputtering deposition method

Preparation and Properties of High (002) Orientation ZnO-Li+ Films

Doping and Annealing Effects on ZnO:Cd Thin Films by Sol–gel Method

Electric and Magnetic Behaviors of Li and Co Codoped ZnO Thin Film on Si (100) Substrate

Study on Ferroelectric and Dielectric Properties of Li-doped ZnO Ceramics and Thin Films Prepared by PLD Method

Fabrication of P-Type Li-Doped Zno Films by Pulsed Laser Deposition

J-V characteristics of sol-gel-prepared Zn2+ doped LiNbO3

Effects of Substrate Quality on Fabrication of ZnO Piezoelectric Thin Film by Sol-gel Method

The influence of different doping elements on microstructure, piezoelectric coefficient and resistivity of sputtered ZnO film

Characteristics of Al-doped C-Axis Orientation ZnO Thin Films Prepared by the Sol–gel Method

Al-Doping Effects on Structure, Electrical and Optical Properties of C-Axis-Orientated Zno : Al Thin Films