Abstract:MEMS (Microelectromechanical Systems) electrostatic actuators have been successfully applied in a number of areas, including accelerometers, gyroscopes, pressure sensors, and optical devices. In this paper, the actuator optimization of a silicon bulk-micro machined MEMS compound electrostatic actuator of an optical device is discussed. The actuator uses folded-beam structure to enhance the electromechanical performance. The movable block is connected to the compound electrostatic actuator through unequal-height folded-beam springs. The lower-height springs connect the block with parallel plates, and can convert the descending motion of the plates into out-of-plane tilting motion of the block efficiently Additionally, the block is capable of in-plane motion by applying the driving force of the comb-drive actuator through structural connection. ANSYS FEM simulation is used to extract the device electromechanical performance and resonant frequency of the device. By gradually varying the design parameters in ANSYS simulation, the relationship between the actuator electromechanical performance and various design parameters is derived. The curves of actuator electromechanical performance versus beam length and beam height are derived and they are in good agreement with theoretical prediction. From the analysis it is concluded that the actuator behavior strongly depends upon various actuator parameters. By adjusting design parameters, desired electromechanical performance can be obtained. Based on the simulation results, a set of optimized design parameters for the compound electrostatic actuator is decided. The above-proposed MEMS compound electrostatic actuator may be used for many applications, such as optical device and micro-operating.

Stiffness match between electro-thermal micro-actuators and compliant amplifiers

A Stiffness-Tunable MEMS Accelerometer

A variable stiffness compliant actuator based on antagonistic normal-stressed electromagnetic mechanism

Stiffness Matching of Cantilever Beam at Multipositions for Diaphragm Volume Pump Driving

A Novel Flexure-Based 3-DOF Micro-Parallel Manipulator with a Gripper for Micro/nano Manipulation

Design and modeling of a compact compliant stroke amplification mechanism with completely distributed compliance for ground-mounted actuators

Output decoupling modeling of a XY flexure-based compliant manipulator

Coupled-field finite element analysis of MEMS compound electrostatic actuator by using the ANSYS software

Analysis and Study of Variable Stiffness Joints Based on Bi-Material Nested Elastomers

Force Analysis And Experiment Of Variable Stiffness Soft Actuator Based On Particle Jamming

Tilted folded-beam suspension for extending the stable travel range of comb-drive actuators

Compliance modeling of planar flexure-based mechanisms and its application to micro-motion stages

Study on the Mech Anical Stiffness of the Flexible Beams in a Micro-Machined Accelerometer

Compliant actuators that mimic biological muscle performance with applications in a highly biomimetic robotic arm

An electromechanical dynamic stiffness matrix of piezoelectric stacks for systematic design of micro/nano motion actuators

Stiffness amplification of actuator and governing error analysis in active vibration isolation

Vibration Sensitivity Reduction of Micromachined Tuning Fork Gyroscopes through Stiffness Match Method with Negative Electrostatic Spring Effect

A Novel Rotational Actuator With Variable Stiffness Using S-Shaped Springs

Stiffness modeling of compliant parallel mechanisms and applications in the performance analysis of a decoupled parallel compliant stage

Output decoupling property of planar flexure-based compliant mechanisms with symmetric configuration

Geometrical Variation Analysis of an Electrothermally Driven Polysilicon Microactuator