Abstract:New Cu-based bulk glassy alloys were formed in Cu–Zr–Ti and Cu–Hf–Ti systems by the copper mold casting method. The critical diameter is 4 mm for the Cu60Zr30Ti10 and Cu60Hf25Ti15 alloys which are larger than 1 mm for the Cu60Zr40 and Cu60Hf40 glassy alloys. The substitution of Zr or Hf for Ti causes an increase in the glass-forming ability (GFA). As the Ti content increases, the glass transition temperature (Tg), crystallization temperature (Tx), and the supercooled liquid region ΔTx(=Tx−Tg) decrease for both Cu60Zr40−xTix and Cu60Hf40−xTix alloys. In contrast, the liquid temperature (Tl) has a minimum value of 1127 K for the Cu60Zr20Ti20 alloy and 1175 K for the Cu60Hf20Ti20 alloy, resulting in a maximum Tg/Tl of 0.63 and 0.62, respectively. The alloys with the highest Tg/Tl value showed the highest GFA for these Cu-based alloys. The bulk glassy alloys exhibit high tensile fracture strength of 2000–2160 MPa, compressive fracture strength of 2060–2150 MPa and compressive plastic elongations of 0.8–1.7%. The finding of the new Cu-based bulk glassy alloys with high GFA, high fracture strength above 2000 MPa and distinct plastic elongation is encouraging for the future development of a new type of bulk glassy alloy which can be used for structural materials.

High Glass-Forming Ability Correlated with Fragility of Mg–Cu(Ag)–Gd Alloys

Glass-Forming Ability and Mechanical Properties of the Ternary Cu-Zr-Al and Quaternary Cu-Zr-Al-Ag Bulk Metallic Glasses

Doubling the Critical Size for Bulk Metallic Glass Formation in the Mg−Cu−Y Ternary System

High-strength Cu-based bulk glassy alloys in Cu–Zr–Ti and Cu–Hf–Ti ternary systems

Critical size and strength of the best bulk metallic glass former in the Mg–Cu–Gd ternary system

Ni- and Be-free Zr-based bulk metallic glasses with high glass-forming ability and unusual plasticity.

A new Mg65Cu7.5Ni7.5Zn5Ag 5Y10 bulk metallic glass with strong glass-forming ability

A New Cu–Hf–Al Ternary Bulk Metallic Glass with High Glass Forming Ability and Ductility

Centimeter-sized Ti-based Bulk Metallic Glass with High Specific Strength

A New Mg 65 Cu 7.5 Ni 7.5 Zn 5 Ag 5 Y 10 Bulk Metallic Glass with Strong Glass-Forming Ability

Ultrastrong behaviors of a non-equiatomic Ti-Zr-Ni-Cu-Be high entropy metallic glass with ultrahigh glass forming ability

Cu-based bulk glassy alloys with high tensile strength of over 2000 MPa

A Ti–Zr–Be–Fe–Cu Bulk Metallic Glass with Superior Glass-Forming Ability and High Specific Strength

Thermal Stability, Glass-Forming Ability and Mechanical Properties of Mg-Y-Zn-Cu Glassy Alloys

La-based bulk metallic glasses with critical diameter up to 30mm

Glass forming ability of bulk glass forming alloys

Correlation of the Glass Formation and Phase Selection of the Mg-Cu-Gd Bulk Metallic Glass Forming Alloys

Cu-Based Bulk Glassy Alloys with Good Mechanical Properties in Cu-Zr-Hf-Ti System

Glass Forming Abilities of Binary Cu100−xZrx (34, 35.5, and 38.2 At. %) Metallic Glasses: A LAMMPS Study

Glass Formability, Thermal Stability and Mechanical Properties of La-Based Bulk Metallic Glasses

The Relation of Mechanical Properties and Local Structures in Bulk Mg54(Cu1−xAgx)35Y11 Metallic Glasses: Ab Initio Molecular Dynamics Simulations