Abstract:The BaTiO3-based multi-layer ceramic capacitors (MLCCs) has been widely used with the development of the automobile, personal computers and other electronic equipment. As the most important performance parameter of MLCCs, the reliability is mainly affected by grain size, oxygen vacancy concentration and migration energy, which has been generally accepted. However, there is not a comprehensive and profound understanding for the failure mechanism of MLCCs. Generally, the failure sample mainly shows aggregation of oxygen vacancies, resulting in a large drop in resistance. Actually, the change in the micro-structure of the failure sample can also be reflected by the dielectric and ferroelectric properties. In this work, two 0805 MLCCs devices with a BaTiO3 dielectric layer of ~4μm, including a normal sample without aging and a failed sample manifested as a resistance drop of one order after aging at 125 ℃, 37.5 V for 168 h, were investigated. We demonstrated the capacity of failure sample decreased and the dielectric loss increased comparing the normal sample. For the ferroelectric properties, all the samples show that the coercive electric field and residual polarization increase with the temperature increasing, while the symmetry of the hysteresis loop and the Pmax (Maximum polarization) decreased for the failure sample. Furthermore, we also proved that the Schottky barrier of the Ni-BaTiO3 interface layer decreased from 0.6eV to 0.4eV after aging, which was mainly caused by oxygen vacancy migration interpreted by the measurement and analysis of XPS (X-ray photoelectron spectroscopy), IV in different temperature, SKPM (Scanning Kelvin probe microcope). At last, the migration mechanism model of oxygen vacancy is established for further exploration of the failure mechanism.

Investigation Of Interdiffusion In Ba(Ti,Zr)O-3-Based Y5v Multilayer Ceramic Capacitors With Ni Electrodes

Electrode–Ceramic Inter‐Diffusion of Ba(Ti,Zr)O3‐Based Y5V MLCCs with Ni Electrodes

Investigation on the inter-diffusion and microstructure in multilayer ceramic capacitors

Observation on the Interdiffusion in Multilayer Ceramic Capacitors

Interfacial Diffusion Behavior in Ni-Batio3 Mlccs with Ultra-Thin Active Layers

Study on the Interdiffusion in Base-Metal-electrode MLCCs

Investigation of Ceramic-Metal Interfacial Behavior in Base Metal Electrode MLCC

Nickel diffusion in base-metal-electrode MLCCs

Characteristics and Effects of Interfacial Interdiffusion in Composite Multilayer Ceramic Capacitors

Influence of inner electrode on the microstructure of BZN based MLC

An investigation on the on dielectric, ferroelectric properties and failure mechanism for the 0805X7R multi-layer ceramic capacitor

Defect Dipole Engineering Enhanced the Dielectric Performance and Reliability of Mn-doped BaTiO3-based Multilayer Ceramic Capacitor

Highly Accelerated Resistance Degradation and Thermally Stimulated Relaxation in BaTiO3-based Multilayer Ceramic Capacitors with Y5V Specification

Cofiring Diffusion Behavior of Composite Multilayer Ceramic Capacitors with X7r Characteristics

Electrical And Reliability Characteristics Of Mn-Doped Nano Batio3-Based Ceramics For Ultrathin Multilayer Ceramic Capacitor Application

The effects of solid-state and hydrothermal synthesis methods of BaTiO3 on the reliability of multilayer ceramic capacitors

Effect of Interactions at the Cofired Interface of Electrode/Ceramics on the Reliability of Lead-Based Multilayer Ceramic Capacitors

Direct current-voltage failure in lead magnesium niobate-based multilayer ceramic capacitors

Effect of yttrium (Y) substitution on the structure and dielectric properties of BaTiO3

Co-firing Behavior of ZnTiO3 Dielectric Ceramics/ag Composites for MLCCs

Development of Yttrium-Doped BaTiO3 for Next-Generation Multilayer Ceramic Capacitors