Abstract:Continuous silicon carbide (SIC) fiber-reinforced titanium metal-matrix composites (TMCs ) are potential candidates for high temperature application in jet engines because of their high specific strength and stiffness. However, severe interfacial reactions caused by high temperature manufacture and service have a detrimental effect on the mechanical properties of composites. Furthermore, the phase transition occurred in matrix at elevated temperature is unfavorable to the properties. In this work, the interfacial reaction, matrix phase transformation and thermal stability of SiC/Ti65 composites were investigated. The composites were prepared by the combination of magnetron sputtering and hot isostatic pressing (HIP) method. Matrix-coated precursor wires prepared by sputtering were aligned, degased and encapsulated, then consolidated by HIP. And the densified composites were subjected to long-term thermal exposure at 650, 750, 800 and 900 degrees C respectively. Reaction products and element diffusion of SiCf/ Ti65 composites in different conditions were studied. The results show that the elements diffuse and participate in both interfacial reaction and matrix phase transition during HIP and thermal exposure process. In the as-processed SiCf/Ti65 composites, TIC is the main product of interfacial reaction layer, and (Zr, Nb)(5)Si-4 is the product of matrix phase transition. With the continuous consumption of C-coating layer in the process of thermal exposure, Ti5Si3 and (Zr, Nb)(5)Si-4 form in the interfacial reaction layer, while Ti-3(Al, Sn)C and TiC precipitate in the matrix. The results of thermal stability study indicate a parabolic correlation between interfacial reaction layer thickness and exposure time, and the activation energy of reaction layer growth estimated by Arrhenius equation is 93 kJ/mol. The interface of SiCf/Ti65 composites is stable below 650 degrees C.

Kinetics of interfacial reaction in SiCf/Ti6Al4V composites

Interfacial reactions between polymer derived SiC fiber and Ti 3Si(Al)C2

Interfacial Reactions Between Polymer Derived SiC Fiber and Ti<sub>3</sub>Si(Al)C<sub>2</sub>

Thermal Stability of SiCf/Ti60 Composites

Interfacial Reactions and Mechanical Properties Studies of C-Coated and C/B4C Duplex-Coated SiC Fiber-Reinforced Ti2AlNb Composites

THE INTERFACIAL THERMAL STABILITY AND ELEMENT DIFFUSION MECHANISM OF SiCf/TC17 COMPOSITE

Mechanisms of Interfacial Reaction and Matrix Phase Transition in SiCf/Ti65 Composites

Optimization of C/TiC Duplex Diffusion Barrier Coatings for SiC /ti Composites Based on Interfacial Structure Evolution Exploration

Tensile Behavior of SiC Fiber-Reinforced Γ -Tial Composites Prepared by Suction Casting

High-temperature Microstructure Evolution and Thermal Stability of SiCf/Ti60 Composites

Microstructure and Interfacial Strength of SiC Fiber-Reinforced Ti17 Alloy Composites with Different Consolidation Temperatures

Interfacial reaction in Al2O3 fiber reinforced TiAl matrix composite

The Melt Structural Characteristics Concerning the Interfacial Reaction in SiC(p)/Al Composites

Interfacial reaction of Al matrix composites reinforced with TiO2-coated SiC particles during remelting

Reactions Mechanism and Mechanical Properties of a SiCf/SiC Joint Affected by Cu/Ni/Ti Elements and Inhomogeneous Composites

Effect of Thermal Exposure on the Interface Microstructure and Interfacial Shear Strength of the SiC Fiber Reinforced AlFe5Si2 Matrix Composite

A study of interface reaction zone in a SiC fibre/Ti-17 composite

In-situ synthesis and microstructural evolution of a SiC reinforced Al-50Si composite exhibiting exceptional thermal properties

Reaction Mechanism Of C-F/Ti-Al Composite By Infiltration-Reaction Synthesis

Microstructure Evolution of Ti-Al-C System Composite

Thermodynamic Investigation on K2TiF6 and C Powder to Prepared in-situ TiCp in Molten Al-Si-Fe Alloy